[J.D. Crawford]

Hi All,

I just want to show off my latest acquisition, and hopefully show it off more when it comes home.

I'm generally a collector of medieval sword replicas, but being half Scottish on my father's side, always intended to get my hands on a classic Basket Hilt. To make it special, I wanted it made in Scotland (by the way, my ancestors hail from the West Coast). So Rob Miller of Castle Keep, based on the Isle of Skye, was the natural choice. So I contacted him a couple of years ago and away we went.

As for the project, I tend to gravitate toward big swords, and found this big beauty on an antique web site, described thus:

"A Wonderful Antique Early 18th Century Large Scottish Basket Hilt Sword, circa. 1720-1740. Massive 34.75" double-edge blade with (3) separate narrow fullers on each face. Iron hilt of the form, circa. 1700-1740 with domed pommel. Original shagreen (ray skin) grip with twisted brass wire and 'Turk's Heads'. 40" overall length."

And here are some pictures of the original below (which of course I hope is authentic).

[J.D. Crawford]

And, joyous occasion, I just received pictures of the finished product today!

[Paul Hansen]

Wow! Now that's a sword!

Poor targes... Congratulations!

[Jeremy V. Krause]

This is certainly a departure from your usual collecting. Will be interesting to hear how it handles compared to your medieval swords.

It looks cool.

[Bartek Strojek]

Beautiful piece, I love the aesthetics of those Scottish basket hilts from whatever reason I can't quite express.

This one looks like an absolute beast too, wonder what's the weight like.

[J.D. Crawford]

Rob says its a beast. I'll be happy to provide detailed measurements and impressions when it comes. And yes Jeremy, compare it to some similar sized medieval swords. In the mean time, its awaiting a simple scabbard.

[Scott Kowalski]

Great looking addition to the collection J.D.! I am looking forward to hearing your thoughts on it compared to some of you big one handed medieval swords.

[J. Nicolaysen]

Wow, it looks great JD! I've liked every thing I've seen Rob Miller make, but never have done anything with him. The blade is awesomely big. A lesser maker, I'd be concerned if they could get the handling right, but I think Rob is top shelf and will make it a fine sword. The original you posted looks pretty legit to me, though I'm not an expert.

[J.D. Crawford]

[Daniel Sullivan]

J. D.

Have a couple of basket hilts, but nothing comparable to this. The hilt work is certainly well done and crisp. However, the blade is enough to give me shortness of breath, don't recall seeing anything quite like this before. It may be a beast, but it certainly is a beauty.

Regards,
Dan

[Ian Hutchison]

Fantastic looking sword, J.D. Can't wait to hear more about it when it arrives!

[Lin Robinson]

Both are fine looking swords. You are a fortunateman!

[J.D. Crawford]

Thanks guys. I enjoy seeing pictures of your collections and I'm pleased to share mine with you.

[J.D. Crawford]

And here's the scabbard (looks like its laying on the beach of Skye!). The package should be crossing the Atlantic soon, much like my Scottish ancestors did 190 years ago. (But hopefully the trip will be bit faster and easier).

[Christopher Gregg]

Looks fantastic! Congratulations on a fine piece of Scottish history!

[J.D. Crawford]

Arrived yesterday! Looking forward to reviewing it when I have time.

[Joe Maccarrone]

What a monster!



(And the sword is impressive, too.. )

[J.D. Crawford]

[J.D. Crawford]

And here, at last, is the review I promised Mr. Miller. It’s taken a while, first because things are crazy this year for everyone, and second because I don’t have much expertise on the subject of baskehilt broadswords. My knowledge, such as it is, comes from studying Viking and high medieval swords. As I mentioned above, this was a completist acquisition: as a person proud of my Scottish ancestry, I had to have at least one basket hilt. This one appealed to me because of its ‘medieval’ dimensions.

But here we go:

Introduction

As noted above, this sword is based on an early 18th century antique sword that was for sale some time ago. It is one of the largest of its type I’ve ever seen, as big as some of my larger medieval swords. I’m not sure where it would fit in an Oakshott typology: maybe XX-XXII, but it does not have the typical ricasso of late medieval swords. I don’t know to classify the basket type or origin; maybe some experts out there can chime in on that front.

Some measurements:
Weight: 3.8 Lbs.
Overall length: 38 ¾”
Blade length: 33”
Blade Width at base: 2 3/16”
CoG/PoB: 5 ¾”
Grip: 4” (including ferules).
Cross-section: lenticular, varying non-linearly from ~5mm to < 2mm near tip.
Profile: Convex, non-linear to a slightly rounded tip.
Optimal Striking Point: 10” from tip
Point of minimal vibration on hilt: ~1” from pommel.

Fit and Finish:

Rob Miller does beautiful blades and this is no exception. The fullers are perfect, the lenticular section is super well done, and the profile looks just perfect to the eye. The overall blade finish is very nice: satin, with just one little scratch on the whole thing. (Note that its been sitting in the scabbard for a while and I did not have time to polish it before the pictures below, so a few superficial scuffs and such may be visible.) The basket is very nicely formed and looks very similar to the original sword (to my eye) but has a rougher finish, particularly on the interior. Its very thick and stiff compared to the somewhat flimsy baskets I've seen on entry level broadswords in stores. Rob has some very beautiful and highly ornate baskets on his web site, so I would say this is more of a fighting man’s sword than an prestige weapon in that sense, and he was working on a lower budget here than his higher end pieces. I requested a simple scabbard and that’s what I got: but handsome enough in red with brass chapes.

Handling:

This weapon has a nice mass distribution, but it's ultimately a big heavy sword. Even with the big basket the centre of gravity is fairly far out, like an early medieval sword. In fact it feels a lot like the early medieval swords I’m familiar with, except for that feel of weight and restriction around the hand. Like them, its not built for fencing but might work well from horseback or in that final collision of the ‘highland charge’. Otherwise, it moves well through guard positions, but would tire the arm quickly and the basket does not allow the same freedom of movement (e.g. transitioning between grip styles) that I'm used to. Having said that, the ray skin grip with brass wire provides a very sure grip. BTW, the original sword was even longer, but had a slightly more concave profile which would likely affect handling. Rob noted before delivery that there were some point of contact between the basket and knuckles that he tried to file off. They are still there (although it turns out the weight of the sword twists them away from the hand in forward position). Overall, an insert or a heavy glove would fix that problem.

The edge of this sword was left ‘butter knife’ sharp at my request (my plan was to display it in a fairly public area of the house, so don’t want people cutting themselves). But the edge geometry is excellent and I would say this sword, even as it is, would cut through just about anything if you have the 'swinging' space to get it up to full speed.

Overall Impression:

This is a really cool imposing sword that fulfils exactly what I wanted for display purposes. It's hard to completely capture this on camera but I've done my best below. I really love the blade on this one, even if its not the easiest one to handle. I'm not sure it’s the most practical sword for the average person, especially for fencing, and its not the most refined of its type. If your taste runs to the latter, I recommend you check out Rob Miller’s ‘Castle Keep’ web site to see some really lovely work.

But if you like big, brutish swords, this one’s a beauty.

Now, I’ll let my pictures do the talking:

[Lee O'Hagan]

Thats Alot of sword for only 3.8 pounds,
good job,
lovely blade,
great addition to a collection,