Author |
Message |
Sean Flynt
|
|
|
|
Nathan Robinson
myArmoury Admin
|
|
|
|
Mark Moore
|
Posted: Fri 01 Sep, 2017 8:47 pm Post subject: |
|
|
That's pretty sweet also, but still...#3. ......McM
''Life is like a box of chocolates...'' --- F. Gump
|
|
|
|
Jon Makar
|
Posted: Sat 02 Sep, 2017 8:09 am Post subject: |
|
|
As I was already partial to the bowtie style 5, if it's an option, and in fact based on a vote in general, the curved style 12 is the natural choice to pair with the scent stopper pommel for me!
Last edited by Jon Makar on Sat 02 Sep, 2017 10:09 pm; edited 1 time in total
|
|
|
|
Fisher Lobdell
|
Posted: Sat 02 Sep, 2017 8:52 pm Post subject: |
|
|
I am split between 3 and 2... go with 3.
"Absence of evidence is not necessarily the evedence of Absence." Ewart Oakeshotte.
|
|
|
|
Greg Ballantyne
|
Posted: Sun 03 Sep, 2017 7:25 am Post subject: |
|
|
You need three blades......
|
|
|
|
Ian Hutchison
Location: Louisiana / Nordrhein-Westholland Joined: 27 Nov 2007
Posts: 625
|
Posted: Sun 03 Sep, 2017 3:22 pm Post subject: |
|
|
I'd prefer #2, it just looks right. Then #3. I've never been a fan of 'bowtie' crosses, so not #1
'We are told that the pen is mightier than the sword, but I know which of these weapons I would choose.' - Adrian Carton de Wiart
|
|
|
|
Simon McKenna
Location: Huddersfield, UK Joined: 25 May 2016
Posts: 17
|
Posted: Mon 04 Sep, 2017 11:20 am Post subject: |
|
|
I originally thought 2 but now i see them with the grip on its definitely 3 for me, followed by 2 then 1.
Of course they all look better than my DIY attempt with this blade which is a long-standing work in progress!
|
|
|
|
Julien M
|
Posted: Tue 05 Sep, 2017 6:14 am Post subject: |
|
|
Thanks for the input guys, much appreciated!
My preference goes for the initial design (bowtie+wheel+rainguard) and the scent stopper+curved guard.
In short, I have no clue where I want this to go this will rest on the shelves for a couple of years I bet, until I find out!
I had overlooked the fact that the VA scent stopper pommel is thicker than the grip, which implies I'd have to make a new one, and this may influence my choice here.
Cheers!
J
|
|
|
|
Randall Moffett
|
Posted: Wed 06 Sep, 2017 7:06 am Post subject: |
|
|
I'd go with your initial feeling then. To me the bowtie and wheel pommel look nice together.
Rain guard or not good stuff.
I am preparing to make a scabbard for a sword I have and rehilt it as well. I think your break down of this is very clear and methodical.
Thanks for sharing it!
RPM
|
|
|
|
Julien M
|
Posted: Mon 04 Feb, 2019 5:11 pm Post subject: |
|
|
Finally back at it after my move to Texas.
Complete reboot since I lost interest in my previous designs and now have easy access (+domestic shipping) to the printed armoury hilts by the excellent Mike Jia.
Always loved the concept of interchangeable hilt parts but was never convinced by most mounted swords I've seen using these. Pb is that the tang of the HT longsword is very long - this calls for a smaller pommel (300g) and results in an awkwardly proportioned sword in my opinion. My goal was to reduce the tang size as much as I could to get it to my liking.
So I snatched an unfinished viscount set, cleaned it up, rounded off the top 'wings' of the fishtail to my liking, chopped the tang to optimal size (no thread anymore, will peen) and made a rough scabbard.This is where I am now. Easy project, everything fits together with a few tap of a hammer for once - done over one day for the most part, well suited for my current lack of equipment (I had to ditch a lot of my stuff moving out of the uk (damn 220v/110v...).
I really like the piece - I find it has a distinct LOTR flair to it, which will probably give me an excuse to go fantasy on the scabbard theme. Due to the light pommel, the POB is slightly further down the blade that I would like (15cm) but it still handles nicely. Need to polish all components to satin and peen. Let me know what you think.
Cheers,
J
A few question to my fellow american sword enthusiast and DIYers.
Where can I get cheap steel, bronze, brass etc? ebay in the uk used to be great for that.
Same for leather (tandy?)
I already have a belt sander in mind, the USA is a heaven for heavy duty tools!
|
|
|
|
Jonathan Hodge
Location: East Tennessee Joined: 18 Sep 2015
Posts: 132
|
Posted: Thu 07 Feb, 2019 5:30 pm Post subject: |
|
|
Julien, I like the look of this very much. Well done! Secondly, when you soak and press your scabbard boards, I’m assuming you pre-cut and shape. Is this correct?
|
|
|
|
Antal László
|
Posted: Fri 08 Feb, 2019 1:32 am Post subject: |
|
|
That looks great, I like a bit of LOTR flair.
What are the dimensions of the slot/cavity in that pommel? I'm mostly interested in the dimensions of the recess for the pommel nut.
|
|
|
|
Julien M
|
Posted: Fri 08 Feb, 2019 5:20 pm Post subject: |
|
|
Jonathan Hodge wrote: | Julien, I like the look of this very much. Well done! Secondly, when you soak and press your scabbard boards, I’m assuming you pre-cut and shape. Is this correct? |
Thx Jonathan - yes I've soaked and pressed the boards clamped against the blade after cutting to shape (remember to wrap the oiled blade in plastic wrap before!). In fact I'm pretty sure I've documented the process here on this forum but can't find it anymore...
Hey lazlo - I'll measure the pommel and will send you the details. The hilt parts clean up fast with a Dremel - can't recommend these enough.
|
|
|
|
Julien M
|
Posted: Fri 11 Sep, 2020 2:47 pm Post subject: |
|
|
Well it's only been a few years that this project is pending - some time ago I decided to finish this sword so after peening, dyeing and some tweaks to the scabbard core I call call it done (save for the leather work on the scabbard of course).
I've since antiqued the grip some to tone down that bright red a notch.
|
|
|
|
Charles S.
Location: peat swamps of MN Joined: 03 Mar 2014
Posts: 4
|
Posted: Sun 13 Sep, 2020 4:46 am Post subject: |
|
|
That’s a beautiful piece! I’d been wondering what the finished one would look like for two years now 😁.
|
|
|
|
Julien M
|
Posted: Sun 13 Sep, 2020 8:40 am Post subject: |
|
|
Charles S. wrote: | That’s a beautiful piece! I’d been wondering what the finished one would look like for two years now 😁. |
AhAh - thx for your kind words, it's not unusual for my projects to stretch over decades but this is the longest I have been away from sword making - I blame work and this sort of things fast pilling on my shelves:
...an unexpected and full force return to warhammer fantasy battle and miniature painting as my son came of age.
But the urge to tackle the anvil is steadily coming back so let's see where this goes
|
|
|
|
|