Info Favorites Register Log in
myArmoury.com Discussion Forums

Forum index Memberlist Usergroups Spotlight Topics Search
Forum Index > Makers and Manufacturers Talk > Spear, sword, seax... Reply to topic
This is a standard topic  
Author Message
Scott Roush
Industry Professional



Location: Washburn, WI
Joined: 27 Jan 2011

Posts: 452

Feedback score: None
PostPosted: Mon 13 Mar, 2017 4:21 am    Post subject: Spear, sword, seax...         Reply with quote

Hi folks,

Just an update on things I've been working on:

First is this Migration period ring-sword with pattern welded blade. This was commissioned and was intended to be an artistic expression of the style. It is a 5-bar blade with iron, copper, brass and mammoth bone grip. The weight is 1 pound and 10 oz.







Next up is a pattern welded viking knife with a relic/artifact story behind it:



And lastly... a Viking spear based on the huge 'lances' that were made in the Frankish areas of Germany and imported into Scandinavia. I tried to be as close to the orginals as possible but ended up being contrained by the pattern welded billet. So my version is less wide and less thick at the socket/blade junction. The length of the spear/socket is 27". I've carved a short 'hewn' haft to go along with it as making one in full length would make shipping difficult. The haft is easily removed via pins and a full length can easily be made for it.







This spear is currently available and more information and pictures can be seen here:

http://www.bigrockforge.com/vignestr-war-needle/

I also have a few more things including a gladius and the Castillon dagger:

http://www.bigrockforge.com/category/available/

Thank you and I'm looking forward to comments.

http://www.bigrockforge.com
View user's profile Send private message Visit poster's website
Mark Moore




Location: East backwoods-assed Texas
Joined: 01 Oct 2003
Likes: 6 pages
Reading list: 1 book

Posts: 2,294

Feedback score: None
PostPosted: Mon 13 Mar, 2017 7:05 am    Post subject:         Reply with quote

One pound, ten, on that sword? Surprised Wow! Beautiful works! I think the 'shorty' spear is kinda cool as-is... Big Grin ...But then, I only stand 5'-7''... Laughing Out Loud ...........McM
''Life is like a box of chocolates...'' --- F. Gump
View user's profile Send private message
Scott Roush
Industry Professional



Location: Washburn, WI
Joined: 27 Jan 2011

Posts: 452

Feedback score: None
PostPosted: Mon 13 Mar, 2017 7:12 am    Post subject:         Reply with quote

Mark Moore wrote:
One pound, ten, on that sword? Surprised Wow! Beautiful works! I think the 'shorty' spear is kinda cool as-is... Big Grin ...But then, I only stand 5'-7''... Laughing Out Loud ...........McM


Thanks Mark... I forgot to mention blade length...it's 27.5 which is part of it. But it's also a thin blade. This is the first sword of this period that I've made which feels so lively... and probably not very historically accurate. My customer wanted this.

As to the short spear haft.. It does feel very powerful and useful this way. And according to Egil's saga... there maybe precedence.

http://www.bigrockforge.com
View user's profile Send private message Visit poster's website
Mark Moore




Location: East backwoods-assed Texas
Joined: 01 Oct 2003
Likes: 6 pages
Reading list: 1 book

Posts: 2,294

Feedback score: None
PostPosted: Mon 13 Mar, 2017 7:24 am    Post subject:         Reply with quote

I get your POINT, Scott. (pun totally intended) Laughing Out Loud ......McM
''Life is like a box of chocolates...'' --- F. Gump
View user's profile Send private message
Ben Joy




Location: Missouri
Joined: 21 May 2010
Likes: 1 page

Posts: 122

Feedback score: None
PostPosted: Mon 13 Mar, 2017 9:37 pm    Post subject:         Reply with quote

I'm a poor sob or I'd hop on that spear in a heartbeat. It's absolutely gorgeous pattern-welded work. The sword is an incredible piece; and historically accurate or not it's another piece I'd covet if I weren't so poor. Oh well, at least I'll enjoy the view from here. Funny enough, the sizes and weights of those pieces I think are perfect, but then again I'm also only 5'3", myself.

I normally only "lurk" through this section of the forums, but these pieces were beautiful enough I felt an absolute need to chime in. Simply awe inspiring.

"Men take only their needs into consideration, never their abilities." -Napoleon Bonaparte
View user's profile Send private message
Scott Roush
Industry Professional



Location: Washburn, WI
Joined: 27 Jan 2011

Posts: 452

Feedback score: None
PostPosted: Tue 14 Mar, 2017 2:55 am    Post subject:         Reply with quote

Ben Joy wrote:
I'm a poor sob or I'd hop on that spear in a heartbeat. It's absolutely gorgeous pattern-welded work. The sword is an incredible piece; and historically accurate or not it's another piece I'd covet if I weren't so poor. Oh well, at least I'll enjoy the view from here. Funny enough, the sizes and weights of those pieces I think are perfect, but then again I'm also only 5'3", myself.

I normally only "lurk" through this section of the forums, but these pieces were beautiful enough I felt an absolute need to chime in. Simply awe inspiring.


Thank you very much for the comments Ben...

http://www.bigrockforge.com
View user's profile Send private message Visit poster's website


Display posts from previous:   
Forum Index > Makers and Manufacturers Talk > Spear, sword, seax...
Page 1 of 1 Reply to topic
All times are GMT - 8 Hours

View previous topic :: View next topic
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum






All contents © Copyright 2003-2024 myArmoury.com — All rights reserved
Discussion forums powered by phpBB © The phpBB Group
Switch to the Basic Low-bandwidth Version of the forum