A Question for all you Blackpowder enthusiasts
About how high would 15 grains of powder fill a 1/4" wide by 1" deep hole??

Thanks in advance! -- ElJay
It would largely depend on the grade of powder, it commonly comes in 1F, 2F, 3F and 4F. 15 grains is not very much, it would probably fill it up to around one quarter.

I can give you an exact measurement if you require, once I am home to my supplies.
Paul Mullins wrote:
It would largely depend on the grade of powder, it commonly comes in 1F, 2F, 3F and 4F. 15 grains is not very much, it would probably fill it up to around one quarter.

I can give you an exact measurement if you require, once I am home to my supplies.


Won't come close to that, except possibly with 1F. Why do you need this information?
Knowing Eljay has made some swords and hilts and therefore has a decent interest in historic re-creation, I am guessing perhaps he's helping re-create some form of medieval cannon or bomb.
Jeffrey Faulk wrote:
Knowing Eljay has made some swords and hilts and therefore has a decent interest in historic re-creation, I am guessing perhaps he's helping re-create some form of medieval cannon or bomb.


Knowing what he plans to do with the charge might help someone give him advice to accomplish his goal. That is the only reason I asked. 15 grains of powder is a very small charge for any purpose other than loading a small caliber pocket pistol or the chamber in a small caliber revolver.
Lin Robinson wrote:
Jeffrey Faulk wrote:
Knowing Eljay has made some swords and hilts and therefore has a decent interest in historic re-creation, I am guessing perhaps he's helping re-create some form of medieval cannon or bomb.


Knowing what he plans to do with the charge might help someone give him advice to accomplish his goal. That is the only reason I asked. 15 grains of powder is a very small charge for any purpose other than loading a small caliber pocket pistol or the chamber in a small caliber revolver.


Well, if it's a 1 inch deep, .25 caliber hole, That is rather small. I agree though, knowing the application will help.
The project is a pistol that I'm making for a collector. He's not a blackpowder shooter in a big way, but he does want to try shooting it with a light, 15 grain load, just to see what it's like.

Does that help?

Thanks for the replies so far!

--ElJay
E.B. Erickson wrote:
The project is a pistol that I'm making for a collector. He's not a blackpowder shooter in a big way, but he does want to try shooting it with a light, 15 grain load, just to see what it's like.

Does that help?

Thanks for the replies so far!

--ElJay


A .25 caliber bore usually calls for a small charge, of course. The important thing, in shooting any muzzle loading firearm, is that the ball be firmly seated on the powder charge. As long as that is done then a 15 grain charge, which takes up a very small space, should be adequate. I use 18 grains of FFF in a .36 caliber revolver, for example. Assuming the pistol has a short barrel, if that is the one inch of depth you are referring to, then the light charge should be sufficient to give your customer the experience he is after. Failing to seat the ball on the powder charge will increase chamber pressure dramatically and could rupture the barrel.

Hope this is what you needed to know.
Rule of thumb in muzzleloading to start with is one grain per caliber for rifles and fowlers and half that for pistols. So you could start at about 10 grains of powder for a .25 cal pistol and be just fine.
Consider that the old .22 CB black powder cartridge was often less than 2 grains of powder. The old .22 long only 7 grains of very fine powder. Then consider volume vs weight.

Cheers

GC

Page 1 of 1

Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum




All contents © Copyright 2003-2006 myArmoury.com — All rights reserved
Discussion forums powered by phpBB © The phpBB Group
Switch to the Full-featured Version of the forum