Info Favorites Register Log in
myArmoury.com Discussion Forums

Forum index Memberlist Usergroups Spotlight Topics Search
Forum Index > Off-topic Talk > Closest approximation of bloomery iron wire for mail Reply to topic
This is a standard topic  
Author Message
Stanley Hauser





Joined: 17 Sep 2013

Spotlight topics: 1
Posts: 34

PostPosted: Sat 05 Oct, 2013 2:35 pm    Post subject: Closest approximation of bloomery iron wire for mail         Reply with quote

I have been experimenting with both 1018 mild steel and rebar tie wire for my rings. While I like how the 1018 flattens, it work hardens too much and needs to be normalized more than the rebar. I also have trouble drifting my holes in the 1018 because it doesn't push the material aside in the overlap quite like the rebar does.

While rebar isn't exactly pure (or more or less pure) iron like bloomery iron, would people agree that it is a close approximation as far as softness, appearance and ductility? At the very least, would it be a superior approximation than 1018 steel? If so that I find it a bit ironic that the cheapest material would be the most historic...I know that ductility is desirable in mail so that the rings distort instead of break.

Other than Schmid, who draws his own wire from a bloomery, what do high level mailers typically use for their pieces?
View user's profile Send private message Send e-mail
Mart Shearer




Location: Jackson, MS, USA
Joined: 18 Aug 2012

Posts: 1,302

PostPosted: Sat 05 Oct, 2013 4:24 pm    Post subject:         Reply with quote

Although most people seem to use rebar tie wire, I think it's foolhardy to suggest one type of wire to simulate all varieties used in medieval mail. Have you read Dr. A.R. Williams, The Manufacture of Mail in Medieval Europe: A Technical Note?
http://www.google.com/url?sa=t&rct=j&...7100,d.eWU

ferrum ferro acuitur et homo exacuit faciem amici sui
View user's profile Send private message
Dan Howard




Location: Maitland, NSW, Australia
Joined: 08 Dec 2004

Spotlight topics: 2
Posts: 3,636

PostPosted: Sat 05 Oct, 2013 5:07 pm    Post subject:         Reply with quote

I just use mild steel but apparently bloomery iron is more ductile than anything we use today so I don't think there is a modern equivalent.
View user's profile Send private message
Peter O Zwart




Location: Ontario Canada
Joined: 28 Nov 2010

Posts: 69

PostPosted: Sat 05 Oct, 2013 7:48 pm    Post subject:         Reply with quote

My best guess would be wrought iron, the trouble is it isn't really made any more, but there is still lots of it around.
View user's profile Send private message
Stanley Hauser





Joined: 17 Sep 2013

Spotlight topics: 1
Posts: 34

PostPosted: Sat 05 Oct, 2013 9:11 pm    Post subject:         Reply with quote

Peter O Zwart wrote:
My best guess would be wrought iron, the trouble is it isn't really made any more, but there is still lots of it around.


Yes that's the thing. None of my options are really perfect...I was just thinking that rebar tie would be the closest thing available in terms of mechanical properties.

Does anyone happen to know the carbon content of rebar tie? I couldn't find it on google.
View user's profile Send private message Send e-mail
Dan Howard




Location: Maitland, NSW, Australia
Joined: 08 Dec 2004

Spotlight topics: 2
Posts: 3,636

PostPosted: Sun 06 Oct, 2013 1:07 am    Post subject:         Reply with quote

Peter O Zwart wrote:
My best guess would be wrought iron, the trouble is it isn't really made any more, but there is still lots of it around.

What most people call "wrought iron" is actually "puddled iron". It is useless for making any kind of armour
View user's profile Send private message
Ken Nelson




Location: central Wisconsin, USA
Joined: 01 Apr 2007
Reading list: 12 books

Posts: 55

PostPosted: Sun 06 Oct, 2013 5:51 pm    Post subject:         Reply with quote

Try looking for wires that are listed as "dead soft annealed" and "Drawing quality" many of them are made from 1008 or 1006. Not only are the drawing quality wires low carbon, they also have very low levels of manganese, that will help slow work hardening as well.

Also, the rebar tie wire, is not made from the same unknown junk as most rebar, it tends to be more similar to 1018 as it needs to be ductile enough to be twisted and still hold the bars together.

"Live and learn, or you don't live long" L. Long
View user's profile Send private message Visit poster's website
Stanley Hauser





Joined: 17 Sep 2013

Spotlight topics: 1
Posts: 34

PostPosted: Sun 06 Oct, 2013 8:59 pm    Post subject:         Reply with quote

I found some 99.5 percent pure iron online, but it is very expensive (about 150 dollars for 10 meters of 16 gauge) and it seems to be intended for use by chemists.

Dan, I know that rebar is basically melted down scrap, but what is puddled iron?
View user's profile Send private message Send e-mail
Dan Howard




Location: Maitland, NSW, Australia
Joined: 08 Dec 2004

Spotlight topics: 2
Posts: 3,636

PostPosted: Sun 06 Oct, 2013 10:39 pm    Post subject:         Reply with quote

http://en.wikipedia.org/wiki/Puddling_%28metallurgy%29
View user's profile Send private message
Johan Gemvik




Location: Stockholm, Sweden
Joined: 10 Nov 2009

Spotlight topics: 1
Posts: 793

PostPosted: Mon 07 Oct, 2013 12:31 pm    Post subject:         Reply with quote

There is this place in the UK that re-use old makes new wrought iron. They even make wire, said so last time I asked them about it for a maille making project....

http://www.realwroughtiron.com/

They have puddle iron of course but also proper wrought.

"The Dwarf sees farther than the Giant when he has the giant's shoulder to mount on" -Coleridge
View user's profile Send private message
Mark Griffin




Location: The Welsh Marches, in the hills above Newtown, Powys.
Joined: 28 Dec 2006

Posts: 802

PostPosted: Mon 07 Oct, 2013 2:26 pm    Post subject:         Reply with quote

I used to use what is sold over here as 'baling' wire, very soft and easy to use. Agricultural suppliers stocked it.
View user's profile Send private message


Display posts from previous:   
Forum Index > Off-topic Talk > Closest approximation of bloomery iron wire for mail
Page 1 of 1 Reply to topic
All times are GMT - 8 Hours

View previous topic :: View next topic
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum






All contents © Copyright 2003-2024 myArmoury.com — All rights reserved
Discussion forums powered by phpBB © The phpBB Group
Switch to the Basic Low-bandwidth Version of the forum