Info Favorites Register Log in
myArmoury.com Discussion Forums

Forum index Memberlist Usergroups Spotlight Topics Search
Forum Index > Makers and Manufacturers Talk > 7 pieces from the Royal Armouries Reply to topic
This is a standard topic Go to page 1, 2, 3  Next 
Author Message
Leo Todeschini
Industry Professional



Location: Oxford, UK
Joined: 12 Nov 2006
Likes: 1 page

Spotlight topics: 1
Posts: 1,723

Feedback score: 100%
(3 total ▮ 100% positive)
PostPosted: Thu 30 Aug, 2012 2:24 pm    Post subject: 7 pieces from the Royal Armouries         Reply with quote

Hi All,

I have been comissioned to make 7 very truthfull replicas from the Royal Armouries as a joint venture between the RA and Bryan Tunstall of The Knight Shop. These will be iconic pieces from the collection of the RA and the absolute emphasis is to interpret the remains of the pieces where they are incomplete and to replicate them as they once would have been. This is of course an incredibly exiting project for me and gives me the chance to handle and replicate with full data and permission provided by the RA.

As the pieces are made I will post them up, but I can tell you there are some very challenging pieces and one in particular that I am both dreading and seriously looking forward to.........

The first of these pieces is an English dagger thought to be from the 15thC. The blade is 12"/30cm and has a hollow ground section with two 'false edge' areas. The guard and pommel are rather unusual and made in bronze and the grip is cord bound elm with a leather cord wrapped grip. The sculpting work was done by Matt Rowe. There will be no scabbards for any of these pieces.

I hope you like it.

Tod



 Attachment: 202.68 KB
english dag 2.jpg


 Attachment: 182.94 KB
english dag 1.jpg


 Attachment: 193.83 KB
english dag 3.jpg


 Attachment: 202.89 KB
english dag 4.jpg


 Attachment: 201.86 KB
english dag 5.jpg


www.todsworkshop.com
www.todcutler.com
www.instagram.com/todsworkshop
https://www.facebook.com/TodsWorkshop
www.youtube.com/user/todsstuff1
View user's profile Send private message Visit poster's website
Roger Hooper




Location: Northern California
Joined: 18 Aug 2003
Likes: 1 page

Spotlight topics: 4
Posts: 4,393

Feedback score: None
PostPosted: Thu 30 Aug, 2012 3:11 pm    Post subject:         Reply with quote

That's beautiful work. Can you post a photo of the original?
View user's profile Send private message
Jean Thibodeau




PostPosted: Thu 30 Aug, 2012 8:27 pm    Post subject:         Reply with quote

The decorative lines in the hilt furniture contrast very attractively with the smooth main bevel of the blade and the two " false edges " are visually a nice surprise and break up the shape of the blade to make it more interesting.

It looks to me that these false edges are really false in the sense of being rather obtuse in angle and not sharp or sharpenable and mostly aesthetic rather than functional as cutting edges, although they might serve some minor function if parrying a sword blade ?

Are these commissioned reproductions going to be exclusive to the Royal Armouries or are you permitted to make more ?

I would hope that you might at least be able to make knives/daggers inspired by these designs, but make them different enough in details and specific decoration, if you are not allowed to make close copies for sale ?

You can easily give up your freedom. You have to fight hard to get it back!
View user's profile Send private message
P. Frank




Location: Germany
Joined: 03 Jan 2010
Reading list: 1 book

Posts: 73

Feedback score: None
PostPosted: Thu 30 Aug, 2012 11:30 pm    Post subject:         Reply with quote

This is really a very interesting piece. Elegant, but also, at least to me, very mean looking.

I really admire your work Tod. One of these Days I will be unable to resist any more and have to commission a piece.
View user's profile Send private message
Leo Todeschini
Industry Professional



Location: Oxford, UK
Joined: 12 Nov 2006
Likes: 1 page

Spotlight topics: 1
Posts: 1,723

Feedback score: 100%
(3 total ▮ 100% positive)
PostPosted: Fri 31 Aug, 2012 2:00 am    Post subject:         Reply with quote

I do not have any pictures I am sure I can post, so you can see the original here http://collections.royalarmouries.org/index.p...=&pg=1

What is odd about the picture is that it looks like I have the false edges the wrong way round, but I can assure you I don't. A deceptive picture. Close examination also shows far more detail was originally there than shows in the picture and so this was put in.

I am not at liberty to expand on the nature of the project I am afraid Jean.

Thanks Mr Frank; I look forward to it.

Tod

www.todsworkshop.com
www.todcutler.com
www.instagram.com/todsworkshop
https://www.facebook.com/TodsWorkshop
www.youtube.com/user/todsstuff1
View user's profile Send private message Visit poster's website
Julien M




Location: Austin TX
Joined: 14 Sep 2005

Spotlight topics: 1
Posts: 1,086

Feedback score: None
PostPosted: Fri 31 Aug, 2012 1:20 pm    Post subject:         Reply with quote

Great work as usual Tod, and a very attractive piece. In league with the biggest UK distributor, with unlimited access to items kept in one of the most impressive collections in the country...this does not get any better for a maker I guess.

That's all well deserved. Congratulations and I will stay tuned for the rest...given the many many items worthy of interest held in the collection, I'm definitely excited to see more.

Julien
View user's profile Send private message
Bartek Strojek




Location: Poland
Joined: 05 Aug 2008
Likes: 23 pages

Posts: 496

Feedback score: None
PostPosted: Fri 31 Aug, 2012 1:34 pm    Post subject:         Reply with quote

Fascinating stuff, I would call this dagger fantasy, if I didn't know it's actual antique. Eek!

Great work all around.
View user's profile Send private message
Leo Todeschini
Industry Professional



Location: Oxford, UK
Joined: 12 Nov 2006
Likes: 1 page

Spotlight topics: 1
Posts: 1,723

Feedback score: 100%
(3 total ▮ 100% positive)
PostPosted: Mon 03 Sep, 2012 2:19 pm    Post subject:         Reply with quote

Bartek Strojek wrote
Quote:
Fascinating stuff, I would call this dagger fantasy, if I didn't know it's actual antique.

Great work all around.


Definitely real!

Thanks for the comments.

Tod

www.todsworkshop.com
www.todcutler.com
www.instagram.com/todsworkshop
https://www.facebook.com/TodsWorkshop
www.youtube.com/user/todsstuff1
View user's profile Send private message Visit poster's website
Leo Todeschini
Industry Professional



Location: Oxford, UK
Joined: 12 Nov 2006
Likes: 1 page

Spotlight topics: 1
Posts: 1,723

Feedback score: 100%
(3 total ▮ 100% positive)
PostPosted: Tue 02 Oct, 2012 6:26 am    Post subject:         Reply with quote

I hope to have another dagger and short sword finished this week or early next so I will post them up with information as they are done.

In the mean time I have just finished sculpting the wax for the guard of Henry VIII's sabre. This sword is quite extraordinary; I just fell in love when I saw it and handled it. It is everything that a sabre should be, quick, light, menacing, wicked and flashy and so many other words too. The make up of the handle is also extraordinary and that will be shown in due course and I have not seen the like. The blade of course is all business.

I am so very excited about this piece I can't stop hopping up and down.

I am so scared of making this piece I can't scrape myself off the floor.

Lets see what happens...........................

Tod

ps one of the pictures was taken before the head was fully carved and the decoration completed.



 Attachment: 30.16 KB
DI 2010-1394.jpg


 Attachment: 179.03 KB
henry sabre guard MA1.jpg


 Attachment: 199.86 KB
henry sabre guard MA.jpg


www.todsworkshop.com
www.todcutler.com
www.instagram.com/todsworkshop
https://www.facebook.com/TodsWorkshop
www.youtube.com/user/todsstuff1
View user's profile Send private message Visit poster's website
P. Frank




Location: Germany
Joined: 03 Jan 2010
Reading list: 1 book

Posts: 73

Feedback score: None
PostPosted: Tue 02 Oct, 2012 6:52 am    Post subject:         Reply with quote

Oh I cannot wait to see how this one turns out! Sabres are favourite of mine and this is of course a very interesting and most beautiful piece.
View user's profile Send private message
Sean Flynt




Location: Birmingham, Alabama
Joined: 21 Aug 2003
Likes: 10 pages
Reading list: 13 books

Spotlight topics: 7
Posts: 5,981

Feedback score: 100%
(1 total ▮ 100% positive)
PostPosted: Tue 02 Oct, 2012 8:27 am    Post subject:         Reply with quote

AHHHH! I've wanted that piece since I first saw it! Fantastic to see you working on it!
-Sean

Author of the Little Hammer novel

https://www.amazon.com/Little-Hammer-Sean-Flynt/dp/B08XN7HZ82/ref=sr_1_1?dchild=1&keywords=little+hammer+book&qid=1627482034&sr=8-1
View user's profile Send private message Visit poster's website
Nathan Robinson
myArmoury Admin


myArmoury Admin

Location: San Francisco
Joined: 07 Jul 2003
Likes: 29 pages
Reading list: 327 books

Spotlight topics: 32
Posts: 11,553

Feedback score: 100%
(12 total ▮ 100% positive)
PostPosted: Tue 02 Oct, 2012 9:13 am    Post subject:         Reply with quote

I've wanted that piece reproduced for a long, long time. I'm thrilled you're doing such a faithful recreation of it! The guard looks fantastic.
.:. Visit my Collection Gallery :: View my Reading List :: View my Wish List :: See Pages I Like :: Find me on Facebook .:.
View user's profile Send private message Send e-mail Visit poster's website
Sean Flynt




Location: Birmingham, Alabama
Joined: 21 Aug 2003
Likes: 10 pages
Reading list: 13 books

Spotlight topics: 7
Posts: 5,981

Feedback score: 100%
(1 total ▮ 100% positive)
PostPosted: Tue 02 Oct, 2012 9:18 am    Post subject:         Reply with quote

Isn't the original thought to have had a cap on the grip? I'm curious to see what you'll do about that.

Does the fact that you're working in wax instead of doing it as a one-off mean you'll be able to sell castings?

-Sean

Author of the Little Hammer novel

https://www.amazon.com/Little-Hammer-Sean-Flynt/dp/B08XN7HZ82/ref=sr_1_1?dchild=1&keywords=little+hammer+book&qid=1627482034&sr=8-1
View user's profile Send private message Visit poster's website
Leo Todeschini
Industry Professional



Location: Oxford, UK
Joined: 12 Nov 2006
Likes: 1 page

Spotlight topics: 1
Posts: 1,723

Feedback score: 100%
(3 total ▮ 100% positive)
PostPosted: Tue 02 Oct, 2012 11:11 pm    Post subject:         Reply with quote

Sean Flynt wrote
Quote:
Isn't the original thought to have had a cap on the grip? I'm curious to see what you'll do about that.


I had a good look at the grip and saw no evidence of this at all. The handle is formed of two scales that are larger than the tang underneath, so that the tang will fit up through the guard and allow the handle to be larger than this would otherwise allow.

the handle scales are wood and I think Oak, but they were originally covered with a tight woven fabric. There is no evidence of what this looked like, but it did not look like an underlayer and there is no structural reason to do this that I can see, and so I think the grip that showed was in fact fabric covered.

Tod

www.todsworkshop.com
www.todcutler.com
www.instagram.com/todsworkshop
https://www.facebook.com/TodsWorkshop
www.youtube.com/user/todsstuff1


Last edited by Leo Todeschini on Wed 03 Oct, 2012 9:15 am; edited 1 time in total
View user's profile Send private message Visit poster's website
William M




Location: Buckinghamshire , England
Joined: 01 Dec 2004
Likes: 1 page
Reading list: 7 books

Posts: 267

Feedback score: None
PostPosted: Wed 03 Oct, 2012 1:31 am    Post subject:         Reply with quote

Incredible project, I am really looking forward to seeing the other pieces. Exact reproductions of original pieces are what I just love so this is quite exciting!

With the first dagger that was posted, is it just me or is there some copper inlay on the original dagger?
View user's profile Send private message MSN Messenger
Sean Flynt




Location: Birmingham, Alabama
Joined: 21 Aug 2003
Likes: 10 pages
Reading list: 13 books

Spotlight topics: 7
Posts: 5,981

Feedback score: 100%
(1 total ▮ 100% positive)
PostPosted: Wed 03 Oct, 2012 7:28 am    Post subject:         Reply with quote

Thanks! I don't remember where I read that the piece had a cap, but it's a good reminder about not believing everything we read.
-Sean

Author of the Little Hammer novel

https://www.amazon.com/Little-Hammer-Sean-Flynt/dp/B08XN7HZ82/ref=sr_1_1?dchild=1&keywords=little+hammer+book&qid=1627482034&sr=8-1
View user's profile Send private message Visit poster's website
Craig Johnson
Industry Professional



Location: Minneapolis, MN, USA
Joined: 18 Aug 2003
Likes: 16 pages
Reading list: 20 books

Spotlight topics: 1
Posts: 1,421

Feedback score: 100%
(1 total ▮ 100% positive)
PostPosted: Wed 03 Oct, 2012 7:45 am    Post subject:         Reply with quote

Leo Todeschini wrote:
Sean Flynt wrote
Quote:
Isn't the original thought to have had a cap on the grip? I'm curious to see what you'll do about that.


I had a good look at the grip and saw no evidence of this at all. The handle is formed of two scales that are larger than the tang underneath, so that the blade will fit up through the guard and allow the handle to be larger than this would otherwise allow.

the handle scales are wood and I think Oak, but they were originally covered with a tight woven fabric. There is no evidence of what this looked like, but it did not look like an underlayer and there is no structural reason to do this that I can see, and so I think the grip that showed was in fact fabric covered.

Tod


I have come across a couple of pieces that were fabric covered. One, a dagger, had a nice tightly woven cover but a bland tan color. The original color had faded away completely. The obsession we have today for leather is something I think the high end user of the past would have seen as a bit low end. One must have a weapon that displays wealth and taste as well as ability to cleave ones enemies asunder. Happy

Craig
View user's profile Send private message Send e-mail Visit poster's website
Leo Todeschini
Industry Professional



Location: Oxford, UK
Joined: 12 Nov 2006
Likes: 1 page

Spotlight topics: 1
Posts: 1,723

Feedback score: 100%
(3 total ▮ 100% positive)
PostPosted: Thu 04 Oct, 2012 12:51 am    Post subject:         Reply with quote

Craig Johnson wrote
Quote:
I have come across a couple of pieces that were fabric covered. One, a dagger, had a nice tightly woven cover but a bland tan color. The original color had faded away completely.


Of course there is also the Spanish one that belonged to a prince or a noble I think that was in his coffin - shown in Records. Anyway the point is made that there are few around now.

Craig Johnson wrote
Quote:
The obsession we have today for leather is something I think the high end user of the past would have seen as a bit low end


I totally agree. It was a workaday material and though very useful for so many things, the look of the leather itself was likely not sought. I will make a knife scabbard now and look at the curves and shapes, the way it can mould and hold its shape, the mottled colour of the dyeing and the high polish after waxing and, with some colours, the attractiveness of that colour and I like it all for its 'honest simplicity'. I suspect our forerunners would look at it and think 'wasted opportunity'.

If it stopped moving, it was decorated and in the moneyed end of society the more expensively the better and that is likely to have been true for material usage too, so why not an Italian velvet or a chinese silk Damascus brocade or a Turkish gold thread fabric. If it wears quick - so what? money sorts that out.

Tod

www.todsworkshop.com
www.todcutler.com
www.instagram.com/todsworkshop
https://www.facebook.com/TodsWorkshop
www.youtube.com/user/todsstuff1
View user's profile Send private message Visit poster's website
Peter Johnsson
Industry Professional



Location: Storvreta, Sweden
Joined: 27 Aug 2003
Reading list: 1 book

Spotlight topics: 3
Posts: 1,757

Feedback score: None
PostPosted: Thu 04 Oct, 2012 1:23 am    Post subject:         Reply with quote

I have seen some grips covered with velvet.
-Lush :-)
View user's profile Send private message Visit poster's website
Sean Flynt




Location: Birmingham, Alabama
Joined: 21 Aug 2003
Likes: 10 pages
Reading list: 13 books

Spotlight topics: 7
Posts: 5,981

Feedback score: 100%
(1 total ▮ 100% positive)
PostPosted: Thu 04 Oct, 2012 9:31 am    Post subject:         Reply with quote

For what it's worth, this MIGHT depict a fine cloth binding ca. 1330.


 Attachment: 199.13 KB
7019497.JPG


-Sean

Author of the Little Hammer novel

https://www.amazon.com/Little-Hammer-Sean-Flynt/dp/B08XN7HZ82/ref=sr_1_1?dchild=1&keywords=little+hammer+book&qid=1627482034&sr=8-1
View user's profile Send private message Visit poster's website


Display posts from previous:   
Forum Index > Makers and Manufacturers Talk > 7 pieces from the Royal Armouries
Page 1 of 3 Reply to topic
Go to page 1, 2, 3  Next All times are GMT - 8 Hours

View previous topic :: View next topic
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum






All contents © Copyright 2003-2024 myArmoury.com — All rights reserved
Discussion forums powered by phpBB © The phpBB Group
Switch to the Basic Low-bandwidth Version of the forum