Info Favorites Register Log in
myArmoury.com Discussion Forums

Forum index Memberlist Usergroups Spotlight Topics Search
Forum Index > Makers and Manufacturers Talk > New Type I/II Saex and sheath Reply to topic
This is a standard topic  
Author Message
Michael Pearce
Industry Professional



Location: Seattle, Wa.
Joined: 21 Feb 2004

Posts: 365

Feedback score: None
PostPosted: Sat 07 Jul, 2012 8:34 am    Post subject: New Type I/II Saex and sheath         Reply with quote



This sax and it's sheath are inspired by a scabbard found near Groningen in the Netherlands dating to approximately the 8th Century A.D.  The original scabbard had apparently been shortened as the tooling on that scabbard runs off the tip.  On this one I have used a new pattern at the tip as the scabbard is made to the correct length for the sax.  I have also varied from the original by using fewer, larger-diameter rivets and using a slightly different pattern for the tooling.

Blade is flat-ground from selectively-hardened 5160 spring steel, furniture is mild steel and handle is Cocobolo wood. Scabbard is 9 oz. top-grain vegetable-tanned leather.

More photos and details here: http://tinkerswords.com/forsale.html

Michael 'Tinker' Pearce
-------------
Then one night, as my car was going backwards through a cornfield at 90mph, I had an epiphany...
View user's profile Send private message Send e-mail Visit poster's website
Mark Routledge
Industry Professional



Location: UK
Joined: 03 May 2010

Posts: 56

Feedback score: None
PostPosted: Sat 07 Jul, 2012 11:41 am    Post subject:         Reply with quote

I reckon I have seen the pictures of the original you speak of. That is a nice looking seax and the scabbard is spot on. Good stuff Happy
www.wessexwildcraft.com
View user's profile Send private message Visit poster's website
Matthew Bunker




Location: Somerset UK
Joined: 02 Apr 2009

Posts: 483

Feedback score: None
PostPosted: Sat 07 Jul, 2012 12:05 pm    Post subject:         Reply with quote

Mark Routledge wrote:
I reckon I have seen the pictures of the original you speak of.


I'm pretty sure I sent them to you but you can also find the drawing of it on thisold thread...http://www.myArmoury.com/talk/viewtopic.php?t=14919

The seax is good but that's really nice work on the sheath Michael, lovely job.
I think it's a bit earlier than 8th century though...6th/7th I thought. Regardless though, it's a fine piece.

"If a Greek can do it, two Englishman certainly can !"
View user's profile Send private message
Michael Pearce
Industry Professional



Location: Seattle, Wa.
Joined: 21 Feb 2004

Posts: 365

Feedback score: None
PostPosted: Sat 07 Jul, 2012 12:59 pm    Post subject:         Reply with quote

Matthew Bunker wrote:
Mark Routledge wrote:
I reckon I have seen the pictures of the original you speak of.


I'm pretty sure I sent them to you but you can also find the drawing of it on thisold thread...http://www.myArmoury.com/talk/viewtopic.php?t=14919

The seax is good but that's really nice work on the sheath Michael, lovely job.
I think it's a bit earlier than 8th century though...6th/7th I thought. Regardless though, it's a fine piece.


It could easily be that early- that general style of sax spans several centuries. I have a copies of several drawings of this sheath from Jeroen's files but the more the merrier! Thanks for the link to that thread. I will be looking at that in detail; I've been on a sax kick lately!

Michael 'Tinker' Pearce
-------------
Then one night, as my car was going backwards through a cornfield at 90mph, I had an epiphany...
View user's profile Send private message Send e-mail Visit poster's website
Bryce Felperin




Location: San Jose, CA
Joined: 16 Feb 2006

Posts: 552

Feedback score: None
PostPosted: Wed 08 Aug, 2012 4:04 am    Post subject:         Reply with quote

It's mine now! :-)

Arrived on my birthday 8-3 and its a beautiful and greatly made example of Michael's work. The balance is excellent, right at the end of the grip. Despite it's heft and size it feels really great in the hand. I wore it at the San Jose Renaissance Faire this last weekend.

Great job Michael and thanks for all the effort you made getting this to me! Best regards and wishes on your health.

Bryce Felperin
View user's profile Send private message


Display posts from previous:   
Forum Index > Makers and Manufacturers Talk > New Type I/II Saex and sheath
Page 1 of 1 Reply to topic
All times are GMT - 8 Hours

View previous topic :: View next topic
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum






All contents © Copyright 2003-2024 myArmoury.com — All rights reserved
Discussion forums powered by phpBB © The phpBB Group
Switch to the Basic Low-bandwidth Version of the forum