Info Favorites Register Log in
myArmoury.com Discussion Forums

Forum index Memberlist Usergroups Spotlight Topics Search
Forum Index > Makers and Manufacturers Talk > pavaise reproduction Reply to topic
This is a standard topic  
Author Message
Leo Todeschini
Industry Professional



Location: Oxford, UK
Joined: 12 Nov 2006
Likes: 1 page

Spotlight topics: 1
Posts: 1,723

Feedback score: 100%
(3 total ▮ 100% positive)
PostPosted: Tue 31 May, 2011 5:31 pm    Post subject: pavaise reproduction         Reply with quote

Hi All,

I have just finished a pavaise reproduction for a customer and ready for delivery in Sterkshof this weekend.

The (large) Pavaise was a shield used by crossbowmen and was carried onto the field and placed as a temporary shield against incoming projectiles whilst the archer loaded and shot his bow. To this end they were large as they were not meant for mobile combat and thus afforded the maximum protection. They also usually feature either a wooden or metal stay or a ground spike on the bottom edge.

They almost always feature a central rib and are gently curved and very often highly decorated.

This repro is made from formed ply rather than planked and is covered in linen canvas and a modern gesso. The distinctive handle is leather covered rope and the stay is made from oiled ash with a top pivot and a bottom lashing. The carry strap has hand forged buckle and plate.

All the components are rivetted on with rose head nails.

The shield is about 1.35m tall by 60cm wide and 12mm thick (4'6" x 2' x 1/2")

The painting is based on an original.

The turned edge on the back face looks a little rough, but I have based it on the edging of an original and I like the hand made look it offers.

I hope you like it.

Tod



 Attachment: 206.15 KB
pav5.jpg


 Attachment: 215.57 KB
pav6.jpg


 Attachment: 204.14 KB
pav3.jpg


 Attachment: 161.1 KB
pav4.jpg


 Attachment: 194.1 KB
pav7.jpg


www.todsworkshop.com
www.todcutler.com
www.instagram.com/todsworkshop
https://www.facebook.com/TodsWorkshop
www.youtube.com/user/todsstuff1
View user's profile Send private message Visit poster's website
Felix R.




PostPosted: Tue 31 May, 2011 9:25 pm    Post subject:         Reply with quote

Very nice Pavese, is it the piece from Schlss Tirol it is based on?


 Attachment: 68.8 KB
HPIM1376.JPG

View user's profile Send private message
Hendrik De Coster




Location: Belgium
Joined: 20 Jan 2007

Posts: 115

Feedback score: None
PostPosted: Wed 01 Jun, 2011 4:48 am    Post subject:         Reply with quote

looking awesome! was it made in a single piece or did you curve the sides and cut the middle out of a bar and then attached them?
View user's profile Send private message Send e-mail MSN Messenger
Russ Ellis
Industry Professional



PostPosted: Wed 01 Jun, 2011 6:38 am    Post subject:         Reply with quote

Grief, Tod, I'd say you were a renaissance man... if you didn't do so many things that were pre-renaissance. Is there any project that you've ever just flat out turned down and said "no I don't do that?"
TRITONWORKS Custom Scabbards
View user's profile Send private message
Blaz Berlec




Location: Podgorje, Kamnik, Slovenia, Europe
Joined: 26 Aug 2003
Reading list: 1 book

Spotlight topics: 4
Posts: 416

Feedback score: None
PostPosted: Wed 01 Jun, 2011 9:33 am    Post subject:         Reply with quote

Great! I just wonder, why aren't the rivets done below the linen and gesso in front? I assumed this was common. It was sometimes re-gessoed and repainted even when the rivets were replaced.

I'm still working on mine. Still only in my head, I'm afraid...


Extant 15th Century German Gothic Armour
Extant 15th century Milanese armour
Arming doublet of the 15th century
View user's profile Send private message Visit poster's website
Leo Todeschini
Industry Professional



Location: Oxford, UK
Joined: 12 Nov 2006
Likes: 1 page

Spotlight topics: 1
Posts: 1,723

Feedback score: 100%
(3 total ▮ 100% positive)
PostPosted: Wed 01 Jun, 2011 12:27 pm    Post subject:         Reply with quote

Thanks guys.

In order of comments:

The piece was indeed based on the one at Schloss Tirol, though that picture is the only one I had to go on.

It was formed from two curved ply panels and a central trough.

I declined a job to mumify a person earlier this year - for real. I can't say any more, but my wife was rather glad I didn't do it. Shame though as I would have a got a really good humidity and temperature controlled chamber perfect for speed seasoning wood.

I like the nail heads showing for personal reasons and I am sure it would have been done both ways.

Regards

Tod

www.todsworkshop.com
www.todcutler.com
www.instagram.com/todsworkshop
https://www.facebook.com/TodsWorkshop
www.youtube.com/user/todsstuff1
View user's profile Send private message Visit poster's website
Jeremy V. Krause




Location: Buffalo, NY.
Joined: 20 Oct 2003
Likes: 1 page
Reading list: 1 book

Spotlight topics: 1
Posts: 1,717

Feedback score: 100%
(1 total ▮ 100% positive)
PostPosted: Wed 01 Jun, 2011 12:58 pm    Post subject:         Reply with quote

Leo Todeschini wrote:
Thanks guys.

In order of comments:

The piece was indeed based on the one at Schloss Tirol, though that picture is the only one I had to go on.

It was formed from two curved ply panels and a central trough.

I declined a job to mumify a person earlier this year - for real. I can't say any more, but my wife was rather glad I didn't do it. Shame though as I would have a got a really good humidity and temperature controlled chamber perfect for speed seasoning wood.

I like the nail heads showing for personal reasons and I am sure it would have been done both ways.

Regards

Tod


mummify a person eh? Sounds like you're really branching out into some exciting directions. Happy
View user's profile Send private message
Robert Hinds




Location: Whitewater, Wisconsin USA
Joined: 15 Sep 2010
Likes: 4 pages

Posts: 249

Feedback score: None
PostPosted: Wed 01 Jun, 2011 3:29 pm    Post subject:         Reply with quote

Very, very awesome. Happy

Is it true they were sometimes worn on the back during combat so the crossbowman could turn his back to the enemy while he reloaded and be protected?

"Young knight, learn to love God and revere women; thus your honor will grow. Practice knighthood and learn the Art that dignifies you, and brings you honor in wars." -Johannes Liechtenauer

"...And he that hath no sword, let him sell his garment, and buy one..." Luke 22:36
View user's profile Send private message
Russ Ellis
Industry Professional



PostPosted: Fri 03 Jun, 2011 7:27 am    Post subject:         Reply with quote

Leo Todeschini wrote:
I declined a job to mumify a person earlier this year - for real. I can't say any more, but my wife was rather glad I didn't do it. Shame though as I would have a got a really good humidity and temperature controlled chamber perfect for speed seasoning wood.


Alrighty then. You really do get asked to do pretty much everything! My wife didn't like it when I was using a hair on goat hide to do a bronze age scabbard (didnt' like the trimmed hair everywhere) I think I'll show her your post above and how much worse things can actually be!

TRITONWORKS Custom Scabbards
View user's profile Send private message
Nicolas Grinschgl




Location: Austria
Joined: 30 Dec 2010

Posts: 9

Feedback score: None
PostPosted: Fri 24 Jun, 2011 2:24 am    Post subject:         Reply with quote

Robert Hinds wrote:
Very, very awesome. Happy

Is it true they were sometimes worn on the back during combat so the crossbowman could turn his back to the enemy while he reloaded and be protected?


Hi there!

I do not have any references that they were used in this way during battle, but it worked quite well when i tried it.
(with enough space around me) In a close formation it might be a bit difficult.

@Tod: Absolutely greate work!! Happy

best regards,
Nicolas

www.villach1489.at
View user's profile Send private message
Jean Thibodeau




PostPosted: Fri 24 Jun, 2011 6:49 pm    Post subject:         Reply with quote

Leo Todeschini wrote:

I declined a job to mumify a person earlier this year - for real. I can't say any more, but my wife was rather glad I didn't do it. Shame though as I would have a got a really good humidity and temperature controlled chamber perfect for speed seasoning wood.



O.K. got to ask: Was this someone already dead with some odd ideas about the way they wanted to be buried ?

Or, someone wanting a mummy in the corner for their collection ?

Or, something rather weird and kinky and possibly not " survivable " i.e. the mummified person not completely dead " YET " !

Now that that is out of the way, very interesting pavaise and how much does it weigh ? I would guess that these could be more heavily constructed than a shield one had to use on one's arm in active combat but not so heavy as to be to tiring to carry from position to position. Would these be also a bit thicker to better stop arrows or crossbow bolts ?

You can easily give up your freedom. You have to fight hard to get it back!
View user's profile Send private message


Display posts from previous:   
Forum Index > Makers and Manufacturers Talk > pavaise reproduction
Page 1 of 1 Reply to topic
All times are GMT - 8 Hours

View previous topic :: View next topic
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum






All contents © Copyright 2003-2024 myArmoury.com — All rights reserved
Discussion forums powered by phpBB © The phpBB Group
Switch to the Basic Low-bandwidth Version of the forum