Info Favorites Register Log in
myArmoury.com Discussion Forums

Forum index Memberlist Usergroups Spotlight Topics Search


myArmoury.com is now completely member-supported. Please contribute to our efforts with a donation. Your donations will go towards updating our site, modernizing it, and keeping it viable long-term.
Last 10 Donors: Daniel Sullivan, Anonymous, Chad Arnow, Jonathan Dean, M. Oroszlany, Sam Arwas, Barry C. Hutchins, Dan Kary, Oskar Gessler, Dave Tonge (View All Donors)

Forum Index > Makers and Manufacturers Talk > The making of a Seax by Owen and Tod Reply to topic
This is a standard topic Go to page 1, 2  Next 
Author Message
Owen Bush
Industry Professional



Location: london
Joined: 31 Aug 2007

Posts: 221

Feedback score: None
PostPosted: Mon 21 Feb, 2011 4:54 am    Post subject: The making of a Seax by Owen and Tod         Reply with quote

Tod and I have been in conversation about doing an "ultimate" seax together for a while now . so I have settled on a lang seax.
Over the next few weeks / months I will post a step by step of the Making of a complex multi bar seax.......I'll then hand it over to Tod to do his magic on the handling and sheath work.....
the blade is going to based on dimensions from a piece in the museum of london, however........
I will be adding my own twist to the pattern welding so I am not basing the Piece on any "real " blade in its entirety .
there are two or 3 patterns I have been working on emulating and I'll use on of those .
I will show historical inspiration where it is relevant and say when my muse has taken me away from that when it does!!!
I am bust but will update when I have the chance .....
watch this space!!

forging soul into steel .

www.owenbush.co.uk the home of bushfire forge school of smithing .
View user's profile Send private message Visit poster's website
Julien M




Location: Austin TX
Joined: 14 Sep 2005

Spotlight topics: 1
Posts: 1,086

Feedback score: None
PostPosted: Mon 21 Feb, 2011 4:58 am    Post subject: Re: The making of a Seax by Owen and Tod         Reply with quote

Owen Bush wrote:
watch this space!!


Great stuff. Will certainly do!

Cheers,

J
View user's profile Send private message
Artis Aboltins




PostPosted: Mon 21 Feb, 2011 5:22 am    Post subject:         Reply with quote

Can't wait to see the developement of this masterpiece!
View user's profile Send private message
Leo Todeschini
Industry Professional



Location: Oxford, UK
Joined: 12 Nov 2006
Likes: 1 page

Spotlight topics: 1
Posts: 1,723

Feedback score: 100%
(3 total ▮ 100% positive)
PostPosted: Mon 21 Feb, 2011 5:35 am    Post subject:         Reply with quote

As Owen said this has been something we have been mulling over for a while and looking at his recent blades it will be a pleasure to work on.

However, I do so wish I could edit his first post to change the word "ultimate" for "really quite nice" as I can't help feeling the word does set the bar very high!

Anyway, looking forward to my part in the process a few weeks/months on from now.

Tod

www.todsworkshop.com
www.todcutler.com
www.instagram.com/todsworkshop
https://www.facebook.com/TodsWorkshop
www.youtube.com/user/todsstuff1
View user's profile Send private message Visit poster's website
Matt Corbin




PostPosted: Mon 21 Feb, 2011 6:00 am    Post subject:         Reply with quote

I'm really looking forward to seeing how this develops. This is going to be a VERY special blade.
“This was the age of heroes, some legendary, some historical . . . the misty borderland of history where fact and legend mingle.”
- R. Ewart Oakeshott
View user's profile Send private message
Owen Bush
Industry Professional



Location: london
Joined: 31 Aug 2007

Posts: 221

Feedback score: None
PostPosted: Mon 21 Feb, 2011 9:16 am    Post subject:         Reply with quote

Leo Todeschini wrote:
As Owen said this has been something we have been mulling over for a while and looking at his recent blades it will be a pleasure to work on.

However, I do so wish I could edit his first post to change the word "ultimate" for "really quite nice" as I can't help feeling the word does set the bar very high!

Anyway, looking forward to my part in the process a few weeks/months on from now.

Tod


I think if we look at "ultimate" as being from a personal point of view, as in the best we two makers can do , then thats about what I was looking at ........
If it ends up being "really QUITE nice " I will be disappointed in us!!

forging soul into steel .

www.owenbush.co.uk the home of bushfire forge school of smithing .
View user's profile Send private message Visit poster's website
Tim Lison




Location: Chicago, Illinois
Joined: 05 Aug 2004
Likes: 1 page
Reading list: 6 books

Spotlight topics: 1
Posts: 1,606

Feedback score: 100%
(11 total ▮ 100% positive)
PostPosted: Mon 21 Feb, 2011 9:18 am    Post subject:         Reply with quote

Cool! Looking forward to it.
View user's profile Send private message
Mark Routledge
Industry Professional



Location: UK
Joined: 03 May 2010

Posts: 56

Feedback score: None
PostPosted: Mon 21 Feb, 2011 11:28 am    Post subject:         Reply with quote

Seems like I will not be alone in watching this with exquisite anticipation...............you are both such a tease ; )
View user's profile Send private message Visit poster's website
Scott Hrouda




Location: Minnesota, USA
Joined: 17 Nov 2006
Likes: 15 pages
Reading list: 87 books

Posts: 643

Feedback score: None
PostPosted: Mon 21 Feb, 2011 1:46 pm    Post subject: Re: The making of a Seax by Owen and Tod         Reply with quote

Owen Bush wrote:
Tod and I have been in conversation about doing an "ultimate" seax together for a while now.


Sounds VERY naughty. Eek!

I can't wait to see the results! Happy

...and that, my liege, is how we know the Earth to be banana shaped. - Sir Bedevere
View user's profile Send private message
Jeremy V. Krause




Location: Buffalo, NY.
Joined: 20 Oct 2003
Likes: 1 page
Reading list: 1 book

Spotlight topics: 1
Posts: 1,717

Feedback score: 100%
(1 total ▮ 100% positive)
PostPosted: Mon 21 Feb, 2011 1:52 pm    Post subject:         Reply with quote

pins and needles. . . . .
View user's profile Send private message
Owen Bush
Industry Professional



Location: london
Joined: 31 Aug 2007

Posts: 221

Feedback score: None
PostPosted: Tue 22 Feb, 2011 2:47 pm    Post subject:         Reply with quote

so here you go .
I'll be basing my piece on this blade from the museum of london .


I'll try and shoot for the same dimensions , this will place the blade in the realms of possibility!!
this piece has 3 slim fullers in it and I will reserve the rite to fullering my piece or not .depending on how even I can get the patterning and how that would fit .
I have a pattern welding from another piece I will try . one I have done twice before but not yet gotten exactly to my complete satisfaction.

forging soul into steel .

www.owenbush.co.uk the home of bushfire forge school of smithing .
View user's profile Send private message Visit poster's website
Jeremy V. Krause




Location: Buffalo, NY.
Joined: 20 Oct 2003
Likes: 1 page
Reading list: 1 book

Spotlight topics: 1
Posts: 1,717

Feedback score: 100%
(1 total ▮ 100% positive)
PostPosted: Tue 22 Feb, 2011 3:09 pm    Post subject:         Reply with quote

To what era is this seax dated?
View user's profile Send private message
Owen Bush
Industry Professional



Location: london
Joined: 31 Aug 2007

Posts: 221

Feedback score: None
PostPosted: Tue 22 Feb, 2011 3:13 pm    Post subject:         Reply with quote

I am afraid I do not know .
I measured a few pieces that time and the curator was in a business meeting.
I can find out but it may take a while.........

forging soul into steel .

www.owenbush.co.uk the home of bushfire forge school of smithing .
View user's profile Send private message Visit poster's website
Jeremy V. Krause




Location: Buffalo, NY.
Joined: 20 Oct 2003
Likes: 1 page
Reading list: 1 book

Spotlight topics: 1
Posts: 1,717

Feedback score: 100%
(1 total ▮ 100% positive)
PostPosted: Tue 22 Feb, 2011 3:28 pm    Post subject:         Reply with quote

Owen Bush wrote:
I am afraid I do not know .
I measured a few pieces that time and the curator was in a business meeting.
I can find out but it may take a while.........


I would certainly find it interesting to know as I look at pieces in the context of their historic era. Perhaps Tod knows or other forumites either know the specimen or can guess by the form.

All I can say is that it doesn't appear to be a late period example (post 900c.e.).

In any case, I am excited to see this project develop!
View user's profile Send private message
Dustin R. Reagan





Joined: 09 May 2006

Posts: 264

Feedback score: None
PostPosted: Tue 22 Feb, 2011 3:47 pm    Post subject:         Reply with quote

Owen Bush wrote:
so here you go .
I'll be basing my piece on this blade from the museum of london .

I'll try and shoot for the same dimensions , this will place the blade in the realms of possibility!!
this piece has 3 slim fullers in it and I will reserve the rite to fullering my piece or not .depending on how even I can get the patterning and how that would fit .
I have a pattern welding from another piece I will try . one I have done twice before but not yet gotten exactly to my complete satisfaction.


Very cool. Nice subtle lines to that one. Just curious, for my own seax-edification, what are the approx. dimensions on spine width (say at tang and at the start of the transition to point)?
View user's profile Send private message
Scott Kowalski




Location: Oak Lawn, IL USA
Joined: 24 Nov 2006

Posts: 818

Feedback score: None
PostPosted: Tue 22 Feb, 2011 5:40 pm    Post subject:         Reply with quote

That is going to be a very nice looking sax. I have an OT question though. The Type XII looking sword two above the one you are working with, do you have any information on it? I just looked through my copy of Records and did not see it in there.
Chris Landwehr 10/10/49-1/1/09 My Mom
View user's profile Send private message
Owen Bush
Industry Professional



Location: london
Joined: 31 Aug 2007

Posts: 221

Feedback score: None
PostPosted: Wed 23 Feb, 2011 1:01 am    Post subject:         Reply with quote

Scott,
I do not have any information on that sword.
Records only has a tiny tiny quantity os swords in it and this is a sword from the vaults in the museum of london.

Dustin
I'll dig out the paperwork for you .

Jeremy,
almost all the museum of london finds were from river finds or from building sites around london, many were not documented as they were found and the vast majority were from private collections made up by offering monie out to site formen for anything they find. so there is a lack of providence unlike with grave goods.
like I said I'll ask.

forging soul into steel .

www.owenbush.co.uk the home of bushfire forge school of smithing .
View user's profile Send private message Visit poster's website
Scott Kowalski




Location: Oak Lawn, IL USA
Joined: 24 Nov 2006

Posts: 818

Feedback score: None
PostPosted: Wed 23 Feb, 2011 3:29 am    Post subject:         Reply with quote

Thank you for the reply Owen. It is unfortunate that so many treasures of our passion languish in storerooms or vaults at museums rarely to be seen by the masses let alone those who truly would appreciate them. At least we have the picture you have posted of it.
Chris Landwehr 10/10/49-1/1/09 My Mom
View user's profile Send private message
Owen Bush
Industry Professional



Location: london
Joined: 31 Aug 2007

Posts: 221

Feedback score: None
PostPosted: Wed 23 Feb, 2011 4:08 am    Post subject:         Reply with quote

Scott,
the museum of london have been very very helpful as far as looking at pieces is concerned , it is after all part of their job .
I would hasten to add that it is part of our job as makers to interact with museums in a profesional and understanding manner showing consideration and good manners.
curators are often very busy and fitting in "sword " people can be a pain for them.

it is worth remembering that every one of us who enters a museum back vault is acting as an ambassador for the whole craft .

I will be back there at somepoint soon and will dig that sword out.

forging soul into steel .

www.owenbush.co.uk the home of bushfire forge school of smithing .
View user's profile Send private message Visit poster's website
Mark Routledge
Industry Professional



Location: UK
Joined: 03 May 2010

Posts: 56

Feedback score: None
PostPosted: Wed 23 Feb, 2011 10:39 am    Post subject:         Reply with quote

Really looking forward to this one Owen. Very nice lines on that seax.

Looks quite an early one to me, has shades of some of the continental finds perhaps ?
View user's profile Send private message Visit poster's website


Display posts from previous:   
Forum Index > Makers and Manufacturers Talk > The making of a Seax by Owen and Tod
Page 1 of 2 Reply to topic
Go to page 1, 2  Next All times are GMT - 8 Hours

View previous topic :: View next topic
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum






All contents © Copyright 2003-2024 myArmoury.com — All rights reserved
Discussion forums powered by phpBB © The phpBB Group
Switch to the Basic Low-bandwidth Version of the forum