Armour care -- myArmoury.com

Robert Hinds · Posted: Fri 08 Oct, 2010 3:24 pm Post subject: Armour care

Hello,

I was wondering if some one could help me, i'm getting some armour soon but I have very little information on how to take care of it. I've searched the internet but all I can find is information on sword care, if anyone could post a link, advice, tips or anything in relation to armour care, especially how much oil I should keep on it (if any) and what polish I should keep it at (mirror or satin finish?) I would be extremely grateful.

Thanks in advance Happy

Mark T · Posted: Sat 09 Oct, 2010 12:39 am Post subject:

Hi Robert,

There are loads of threads on this topic here on myA - just do searches for 'care', 'rust', and so on. One product that many of us use is Renaissance Wax, available from various sellers on eBay and other sources. Happy hunting!

Robert Hinds · Posted: Sat 09 Oct, 2010 12:36 pm Post subject:

Thanks for the tip about ren wax mark, but I tried searching under those keywards but I didnt get anything relating to my needs, the most usefull were some threads about sword care. And im still confused as to what amount my armour should be polished, I like satin finish because I wont have to use chrome polish on it after I clean off rust but I dont know if thats historically accurate or not. Also are there instructions on the ren wax bottle as to how much I should use and how much to buff it and such?

Nathan Robinson · myArmoury Admin

Mark T · Posted: Sat 09 Oct, 2010 4:47 pm Post subject:

Robert:

Here are a few threads to get you started:

'Why mineral oil stinks'
'Need help with cleaning rust off weapons and armour'
'Plate Armour care ideas needed'
'Caring for your harness/weapons'

Here's a quick list of various treatments people recommend - apart from providing a list of things to research the pros and cons about, this will give you a list of keywords to use in searches!:

Some folks here avoid some of the synthetic oils, especially if they have a cleaning function, as some formulations can damage leather strapping - hence the preference for Sno-Seal, olive oil / olive oil and beeswax, and Renaissance Wax.

Things often NOT recommended include Brasso and WD40.

As for polishing first, along with searches for 'rust', look for 'sanding pads', 'rust eraser', 'steel wool', 'Scotch Brite / ScotchBrite pads', and 'Flitz'. Michal Plezia here even uses loofa sponges ... it would be great to know if they were used in period! I'll let you do those searches yourself! Big Grin

As you've already seen, much of the useful info will also be in threads about sword care.

If you're looking at blueing and blackening, there are also a few threads on that here. One product a few of us have used is Caswell's Black Oxide Kit, which makes it easy to do your own blackening. (I had mixed results, but that could have been poor surface prep on my part.)

Oh, and the inside of armour - helmets included - should be painted ... that cuts down your work by half!

Finally, if you also want info about cleaning mail, this thread contains a post where I gave URLs to the main threads here in myA: 'Stainless vs Mild Steel Mail'

Enjoy!

Mark T

Jean Thibodeau · Posted: Sat 09 Oct, 2010 11:15 pm Post subject:

Mark very useful compilation of useful Topic threads and enough info given about each link to have an idea about what they are about before " clicking " on them to go see if they answer one's questions.

I've been here " forever ", or at least it seems so, and even I find it useful to go follow up these tips about armour or arms maintenance. Wink

These kind of replies are also very useful for all of us and not just the person asking the question(s) and is not only useful but really really going the extra mile helping other members here, new or long-time members. Happy

Robert Hinds · Posted: Sun 10 Oct, 2010 12:28 am Post subject:

Aaargh! so many different options its confusing!

So far im considering break free and renwax...not sure how easily I can obtain the break free tho.

I was planning a special trip to my state capital today to pick up some renwax before my jack chains arrived but I dont know now...guess i'll swing by the hardware store or wal-mart before I leave and check if they have it.

Thanks mark for the links, it's helped me alot...and simultainiasly made me more confused..lol.

Availablity for me is a big issue, its a big hassle to order anything so i'd prefer to use something that is easily obtainable or easy to make, what sort of places would sell products like break free or ballistol?

I also considered the bee's wax/olive oil home made stuff due to it's inexpensiveness, does anyone know how well that holds up if a weapon or armor is actually used for WMA?...or random small tree destruction...?

Jean Thibodeau · Posted: Sun 10 Oct, 2010 12:59 am Post subject:

Robert Hinds · Posted: Sun 10 Oct, 2010 11:19 am Post subject:

Oh kool, thanks jean. Happy

Robert Hinds · Posted: Sun 10 Oct, 2010 9:39 pm Post subject:

Does anyone know if the "Break-Free CLP" is a winchester product? They sell it at my wal-mart but its made by winchester...just want to make sure I buy the right one.

Also does anyone know if break free or remoil is harmfull to leather?

I think I remember someone mentioned that break free also will remove blueing applied to armour and weapons, can anyone confirm this? And does remoil do the same? Or is it safe to use on blued armour?

sorry for the many questions, but I really want to pick the right stuff to put on my armour. Happy

And thank you for all the help everyone has given me so far, it's really nice having a place to come and ask questions that I wouldn't be able to get answers for anywhere else.