Info Favorites Register Log in
myArmoury.com Discussion Forums

Forum index Memberlist Usergroups Spotlight Topics Search
Forum Index > Off-topic Talk > Making a Rapier Scabbard Reply to topic
This is a standard topic  
Author Message
Pascal B




Location: switzerland
Joined: 21 Feb 2010

Posts: 2

PostPosted: Mon 22 Feb, 2010 10:31 pm    Post subject: Making a Rapier Scabbard         Reply with quote

HI

has anyone any helpful suggestions or knowledge? ive made some for Viking Swords. but not that figurine stuff, which fits a Rapier.
thx.
View user's profile Send private message
Craig Johnson
Industry Professional



Location: Minneapolis, MN, USA
Joined: 18 Aug 2003
Likes: 16 pages
Reading list: 20 books

Spotlight topics: 1
Posts: 1,421

PostPosted: Tue 23 Feb, 2010 6:14 am    Post subject: Rapier Scabbards         Reply with quote

Hi Pascal

Period rapier scabbards have a different construction in most cases to earlier medieval types. I am not sure what you mean by "figurine" but they do some times have elaborate chapes. In most cases the do not have throats or lockets. They will have a bulge or swelling under the covering that will allow the hanger to tighten down and not have the scabbard slide. The shape of the interior is usually a box, not the tight fitting shapes of earlier scabbards. They also will often have the front and back of the scabbard extend up the ricasso to the cross. there are no sides on this section.

There is not a lot of literature on these items and few of the average pieces are displayed in museums or pictured in collections. It can be difficult finding info on them.

Hope this helps

Craig
View user's profile Send private message Send e-mail Visit poster's website
Richard M




Location: Albuquerque, New Mexico
Joined: 08 Dec 2006

Posts: 23

PostPosted: Tue 23 Feb, 2010 4:47 pm    Post subject: Re: Making a Rapier Scabbard         Reply with quote

Pascal B wrote:
HI

has anyone any helpful suggestions or knowledge? ive made some for Viking Swords. but not that figurine stuff, which fits a Rapier.
thx.



Pascal,

I made one a while back. To work within that slender profile takes some patience, but it's not too bad. I used a dremel to hollow out two slats, then glued them together. The mated surface won't be very wide so you'll have to be meticulous about gluing it. When shaping the outside you'll just have to keep in mind the internal dimensions. I suggest starting with a belt sander if you have one, then finishing it with paper.

If yours has a ricasso, fit the mouth to that.
Good Luck Big Grin







I
View user's profile Send private message
Pascal B




Location: switzerland
Joined: 21 Feb 2010

Posts: 2

PostPosted: Sun 28 Feb, 2010 7:58 am    Post subject:         Reply with quote

hi
Thanks for the Ideas und hints.

@ Craig Johnson
with" Figurine" i thaught of those fine patterns and how thin it is

@Richard M

really nice work youve done..What kind of wood did you use? And where did you find this metal cap on the end of the scabbard?

thanks again
View user's profile Send private message
Richard M




Location: Albuquerque, New Mexico
Joined: 08 Dec 2006

Posts: 23

PostPosted: Mon 01 Mar, 2010 5:08 am    Post subject:         Reply with quote

Pascal B wrote:
hi
What kind of wood did you use? And where did you find this metal cap on the end of the scabbard?

thanks again


It's lacewood, with a ferrule made from walnut at the top. Not exactly historic I know. It was fun though.
The chape came from the original Hanwei scabbard that came with the sword. I haven't been able to find a suitable chape for a rapier anywhere on the net.
View user's profile Send private message


Display posts from previous:   
Forum Index > Off-topic Talk > Making a Rapier Scabbard
Page 1 of 1 Reply to topic
All times are GMT - 8 Hours

View previous topic :: View next topic
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum






All contents © Copyright 2003-2024 myArmoury.com — All rights reserved
Discussion forums powered by phpBB © The phpBB Group
Switch to the Basic Low-bandwidth Version of the forum