Looking for Makers of Pattern Welded Sword Blades -- myArmoury.com

C. Gadda

I am contemplating having a Behmer Type V sword (basically like Albion’s old OOP Kragehul Bog sword) made, but with a pattern welded rather than mono-steel blade. Therefore, I am looking for a maker who can perform the following:

1. Construct a reasonably historically correct blade with a pattern welded core and a separate steel edge welded on (the actual metals used and exact pattern of the core is open to discussion)

2. Incorporate multiple fullers in the blade, from 2 to 6 seems to be the historical norm, per Behmer.

3. Be willing to make me just the blade, as I will hilt it myself (though I might entertain a fully hilted sword depending on the maker and their talents; see discussion below).

4. Able to get it done in a reasonable time frame (no more than ~12 months or so)

Here are the makers I’m aware of off the top of my head (I know there are others, but these come readily to mind):

Jim Hrisoulas
Jake Powning
Patrick Barta
Craig Sitch (Manning Imperial)
Paul Binns

Now, while I know Hrisoulas is up to the challenge, he does not sell bare blades (and in all honesty I’m not impressed with his hilt work from a historical accuracy POV). Powning does great work, but his short swords cost over $8K which is priced not only out of my range, but out of orbit. Patrick Barta is an interesting choice - he is the only exception that I know of presently that I would entrust the entire project to, including the hilt. And while his prices are high, they are well in line with superb quality of the end product. Unfortunately, with a waiting list on the order of three years (as I recall), the world will end in 2012 before I get my masterpiece! Kidding, of course, but that is too long a wait, alas.

So that leaves me with Craig and Paul, and I have sent enquiries to both. However, is there anyone else out there that might be worth investigating? I’d actually prefer to work with someone here in the US, if only to avoid issues dealing with overseas shipping and our continually deteriorating USD$ exchange rate (though I’d consider other foreign makers anyway, but I would give a “competitive advantage” to a domestic maker). But apart from the aforementioned, I’m really not aware of any other US makers that can do what I need. I am certain that there must be, but I don’t know who they are.

Suggestions?

Addison C. de Lisle · Posted: Tue 29 Sep, 2009 1:02 pm Post subject:

I think that Michael Pikula would be a good choice; here is his website: http://volundforge.com/

I don't know whether or not he would make a bare blade for sale or not, but his work is excellent, he's in the US, and he's a member of this forum.

Shane Allee may also worth an e-mail. He does great work, specializing in around your time period (I think). Here is his website: http://www.ironagearmoury.com/lisnacrogher.html

Again, I don't know if he does bare blades for sale, but it's worth an e-mail.

Good luck!

Hadrian Coffin · Industry Professional

Michael Pikula, aka Volund Forge
He has a website www.volundforge.com it isn't a fully finished website and doesn't have much of his newer stuff. He is one of the absolute best makers around. I currently have a pattern-welded Peterson type V on commision with hilt inlay. I would do a forum search for pictures of his work and perhaps send him a PM.

Paul Binns
I have a pattern-welded seax and sword set by him, blades only as I will hilt them myself. The blades are briliant, and made with 16th century bloomery iron. He is in England and has a year long waiting list, so it can be a time consuming process.

Patrick Barta
I owned a pattern-welded blade by him for one day, then got an offer and re-sold it. Brilliant work as well, absolute top notch. Three year plus waiting list though.

My suggestion would be Michael Pikula.
Best,
Hadrian

Antonio Lamadrid · Posted: Tue 29 Sep, 2009 1:24 pm Post subject:

From Europe:

http://www.kp-art.fi/jt/index_eng.html
http://www.owenbush.co.uk/

Shane Allee · Industry Professional

Oh I'm no where close to doing pattern welding yet.

I would say that it might be hard to meet all of your needs and you may have to slide on one or two. Don't know of Craig at Manning Imperial is taking orders, but if he isn't you likely won't hear back from him until he is taking them again. I don't understand the logic there, but that is how he has done things in the past. Might also be hard to keep him locked in on a price quote as well.

Another person you might want to talk with is Kevin Cashen. He has studied this period very very well. Don't have any clue about his current wait time, prices, or anything like that though.

Shane

C. Gadda · Posted: Tue 29 Sep, 2009 2:26 pm Post subject:

Nathan Shallcross · Posted: Tue 29 Sep, 2009 2:46 pm Post subject:

Owen bush is definately worth contacting, he's a great guy and does alot of research into historical blades.

I highly recommend him,

R D Moore · Posted: Tue 29 Sep, 2009 3:01 pm Post subject:

I have to place another plug for Michael Pikula at Volund Forge. Reasonable wait and price for top quality work.

Luka Borscak · Posted: Tue 29 Sep, 2009 3:12 pm Post subject:

Check the Stagmer brothers, their site is in the process, but you can email them. They are also members on SBG, I don't know if they are here also. They did some pattern welding, but I don't know how historically accurate they are in that process. http://www.baltimoreknife.com/products.htm

Justin King · Industry Professional

John Lundemo can do wondrous thing with a billet from Jerry Rados, I have talked to him about doing bare blades in the past, so he may be a good option as well.

Vaclav Homan · Posted: Wed 30 Sep, 2009 1:15 am Post subject:

http://www.antiquanova.com/armart/Viking_pattern_welded.htm
Partik Bárta friends from Brno Czech Rep.

Leo Todeschini · Industry Professional

Owen Bush without fail because he fits all your criteria.

He is a good friend and I will say that upfront so it is in the open. However.......

I look after my reputation and I choose Owen to make my pattern welded blades and many of my sword blades; the ones I do make myself he treats for me.

Technically he is without a doubt the best in the UK in my opinion, and one of the best in Europe.

He loves making blades only and fullers are not a problem.

He will be able to turn it round at a reasonable cost in a few months rather than years.

Good luck

Tod

Mike Capanelli · Posted: Wed 30 Sep, 2009 8:48 am Post subject:

Here's another plug for Michael Pikula. As a customer of his I can vouch first hand fir his work. And he's done some really nice pattern welded blades before. His prices are more then reasonable and his wait time is nowhere near Patric Barta's. Add to that he's right here in the states and you have a winner in my book.

C. Gadda · Posted: Wed 30 Sep, 2009 9:13 am Post subject:

Thanks for all the replies! This has been very helpful. It appears that I have multiple candidates to choose from.

For my part I need to scour myArmoury and find all posts pertaining to this type of sword, and scare up as many pictures as I can, and finish my translation of the relevant portions of Behmer, so that I can give a detailed picture of what I want made.

Thanks again!

Martin Erben · Posted: Wed 30 Sep, 2009 11:06 am Post subject:

I think you should ask Markus Balbach. He made a very good replica of the sword of Sutton-Hoo, which can be seen in the Deutsche Klingenmuseum in Solingen.
He always has pattern welded sword blades/blanks in stock. Maybe the right one is waiting for you there. Big Grin

(he can speak english very well, so don't be afraid to ask him in english)
The Link to his side about pattern welded swords: http://www.schmiede-balbach.de/seiten/euroschwerter.html

Here's a picture of the Sutton-Hoo blade and another pattern welded sword and its hilt:

Jeroen Zuiderwijk · Industry Professional

Mind that there are people good at making proper historical blades with the right geometry and balance, and there are people who are great at patternwelding. There are very few that are good at both. So you may end up with a blade that's got a great pattern in it, but rather remote from the original blade in geometry. Patrick Barta obviously is unsurpassable, particularly because he also makes his own steel for the high end blades. I recently held the Sutton Hoo sword in my hands again, and it just reconfirmed me again just how incredibly great Partick's work is.

Philip Melhop · Posted: Wed 30 Sep, 2009 1:00 pm Post subject:

Hi There
another vote for Owen Bush. Had the pleasure of seeing him work at a recent W.M.A event here in the UK. A very well informed chap who was only too happy to show the "secrets" of his trade. As it hapens I was able to handle a sword that he had made (and Tod hilted), it sang in the hand. Sadly all I could afford was a small Viking inspired utility knife
Phil

Jean Thibodeau · Posted: Sun 04 Oct, 2009 6:28 am Post subject:

K J Seago · Posted: Mon 05 Oct, 2009 3:21 am Post subject:

has anyone heard of hector cole? i think he did one of the swords with organic hilt at sutton hoo,lives in east anglia (england) and from what i've seen of him on julian richards programme he does the pattern welding rather well. A friend of mine was considering asking to assist him.