Info Favorites Register Log in
myArmoury.com Discussion Forums

Forum index Memberlist Usergroups Spotlight Topics Search
Forum Index > Makers and Manufacturers Talk > Custom Handmade Scabbard; Arming Sword Reply to topic
This is a standard topic Go to page 1, 2  Next 
Author Message
Brian K.
Industry Professional



Location: Salt Lake City, Utah
Joined: 01 Jan 2008

Posts: 727

Feedback score: None
PostPosted: Sun 02 Aug, 2009 2:24 pm    Post subject: Custom Handmade Scabbard; Arming Sword         Reply with quote

Hello myArmoury community.

I'm a firm believer that every sword deserves a good home, and the Windlass Arming Sword is no exception! I felt pretty good about this one once completed and I thought everyone here would enjoy having a look.

Commentary and such are welcome, as usual and thanks for looking!








Brian Kunz
www.dbkcustomswords.com
View user's profile Send private message Visit poster's website
Scott Kowalski




Location: Oak Lawn, IL USA
Joined: 24 Nov 2006

Posts: 818

Feedback score: None
PostPosted: Sun 02 Aug, 2009 2:45 pm    Post subject:         Reply with quote

That looks very nice Brian. You took something that some might look down on and made it special with another one of your superb scabbards. While it is not your fanciest work in terms of decoration it's simplicity speaks to me as it were.

Scott

Chris Landwehr 10/10/49-1/1/09 My Mom
View user's profile Send private message
Brian K.
Industry Professional



Location: Salt Lake City, Utah
Joined: 01 Jan 2008

Posts: 727

Feedback score: None
PostPosted: Sun 02 Aug, 2009 2:50 pm    Post subject:         Reply with quote

Scott Kowalski wrote:
That looks very nice Brian. You took something that some might look down on and made it special with another one of your superb scabbards. While it is not your fanciest work in terms of decoration it's simplicity speaks to me as it were.

Scott


Thank you Scott, you always have something nice to say and are very cordial I might add. Every once in a while a customer forces my hand into the simple, yet elegant looking leatherwork Wink

Brian Kunz
www.dbkcustomswords.com
View user's profile Send private message Visit poster's website
Scott Kowalski




Location: Oak Lawn, IL USA
Joined: 24 Nov 2006

Posts: 818

Feedback score: None
PostPosted: Sun 02 Aug, 2009 3:02 pm    Post subject:         Reply with quote

Brian K. wrote:
Scott Kowalski wrote:
That looks very nice Brian. You took something that some might look down on and made it special with another one of your superb scabbards. While it is not your fanciest work in terms of decoration it's simplicity speaks to me as it were.

Scott


Thank you Scott, you always have something nice to say and are very cordial I might add. Every once in a while a customer forces my hand into the simple, yet elegant looking leatherwork Wink


You are welcome Brian. I was always told if you do not have something nice to say then do not say it. I try to keep to that as much as I can. I guess it also stems from the fact that I am in sales so how I present myself most of the time as well as speak is important to my well being, and my ability to buy shiny toys and the things that go with them. Sometimes simple is better. Especially when you can make it elegant in the doing.

Scott

That and I plan on contacting you for a scabbard when a couple of other projects are completed so it does not hurt to schmooze you! Wink

Chris Landwehr 10/10/49-1/1/09 My Mom
View user's profile Send private message
R D Moore




PostPosted: Sun 02 Aug, 2009 3:36 pm    Post subject:         Reply with quote

Brian K. wrote:
Every once in a while a customer forces my hand into the simple, yet elegant looking leatherwork Wink


I think the mark of an artisan is to be able to visualize his project be it simple or intricate, plain or ornate culminating in a balance of form, color,- and in the case of scabbards- function. The range and depth of your talent is evident with every piece you post, Brian. Always a pleasure to see your work..

"No man is entitled to the blessings of freedom unless he be vigilant in its preservation" ...Gen. Douglas Macarthur
View user's profile Send private message Send e-mail
Ed S.




Location: San Diego
Joined: 08 Apr 2009

Posts: 86

Feedback score: None
PostPosted: Sun 02 Aug, 2009 4:05 pm    Post subject:         Reply with quote

R D Moore wrote:
Brian K. wrote:
Every once in a while a customer forces my hand into the simple, yet elegant looking leatherwork Wink


I think the mark of an artisan is to be able to visualize his project be it simple or intricate, plain or ornate culminating in a balance of form, color,


I agree completely Happy. Brian always does a superb job creating a scabbard that matches its sword perfectly. Another great job Brian.
View user's profile Send private message
M. Eversberg II




Location: California, Maryland, USA
Joined: 07 Sep 2006
Reading list: 3 books

Spotlight topics: 1
Posts: 1,435

Feedback score: None
PostPosted: Sun 02 Aug, 2009 4:10 pm    Post subject:         Reply with quote

Superb scabbard.

M.

This space for rent or lease.
View user's profile Send private message AIM Address Yahoo Messenger MSN Messenger ICQ Number
Adam S.





Joined: 01 Sep 2006

Posts: 146

Feedback score: None
PostPosted: Sun 02 Aug, 2009 4:15 pm    Post subject: Buckle and Tongue         Reply with quote

Hey Brian,

I've been curious. Why do you cut your belt ends the way you do? When I do a belt I usually notch the transition between the fixture and the leather so that it's flush. Like I said, just curious. Like your scabbards.

~A

View user's profile Send private message
Randy W




Location: Columbus, Ohio
Joined: 18 Feb 2007
Reading list: 6 books

Posts: 142

Feedback score: None
PostPosted: Sun 02 Aug, 2009 4:57 pm    Post subject:         Reply with quote

that really dresses up what I have always considered a rather bland sword, excellent presentation

Randy

Randy Westgate
View user's profile Send private message
Brian K.
Industry Professional



Location: Salt Lake City, Utah
Joined: 01 Jan 2008

Posts: 727

Feedback score: None
PostPosted: Sun 02 Aug, 2009 4:58 pm    Post subject: Re: Buckle and Tongue         Reply with quote

Adam S. wrote:
Hey Brian,

I've been curious. Why do you cut your belt ends the way you do? When I do a belt I usually notch the transition between the fixture and the leather so that it's flush. Like I said, just curious. Like your scabbards.

~A



Hmmm, in short, I actually do everything a little differently each time. I think in this case it could have gone either way. Good eye though.

Brian Kunz
www.dbkcustomswords.com
View user's profile Send private message Visit poster's website
Tim Lison




Location: Chicago, Illinois
Joined: 05 Aug 2004
Likes: 1 page
Reading list: 6 books

Spotlight topics: 1
Posts: 1,606

Feedback score: 100%
(11 total ▮ 100% positive)
PostPosted: Sun 02 Aug, 2009 8:04 pm    Post subject:         Reply with quote

Another solid victory! Keep them coming, your scabbards get better and better. Gorgeous. Simply gorgeous.
View user's profile Send private message
JG Elmslie
Industry Professional



Location: Scotland
Joined: 18 Jun 2009
Reading list: 28 books

Posts: 272

Feedback score: None
PostPosted: Sun 02 Aug, 2009 8:16 pm    Post subject:         Reply with quote

you really are a complete and utter b*****d.
by which, I should add, that that is yet again, completely and utterly gorgeous, and therefore I envy you something rotten for being able to make something of such quality... Happy
Actually, what I envy most is that you seem to be able to make them so blimmin' fast... there's a new post every few days, it seems... amazing.

Someday, if I'm able to send something all the way to you from this side of the pond, I'll have to look at a commission or two. maybe three. or four. actually, make that five. do you do bulk discount for one of every period? Happy


two things I'd like to ask, however: The first is if you have any photos of the scabbard throats? I gather from a comment you made in one thread that you use a wool lining... friends have tried to make scabbards with wool lining for viking period swords (reenactment) and let's just say the end results were... well.... if you imagine a scragging a sheep, and stuffing a strip of it's side between two bits of timber, before wrapping it in a bit of a shaved coo's bum, you've got an idea of what it looked like. now take that image, and make it about 3 times uglier than your first image, and you've got a pretty good picture of the monstosity that was done... I swear, you could've driven a bus into that thing.

so I'd love to see a shot of the throat, so we can look and go "aah, so it is possible", and, if it does'nt inspire the chap to do a commission, perhaps at the least inspire something a little less ghastly than that Frankenscabbard... though even using the same word "scabbard" to describe such an object is an insult to your gorgeous work.... I dont think we got photographs of it, thankfully. it might've cracked the camera lens.

The other question is, can you do scabbards for rebated reenactment blades, with a thicker edge, or does the router/jigging/carving/miracle working you do preclude such thickened edges?
View user's profile Send private message Visit poster's website
Johan S. Moen




Location: Kristiansand, Norway
Joined: 26 Jan 2004

Posts: 259

Feedback score: None
PostPosted: Mon 03 Aug, 2009 4:16 am    Post subject:         Reply with quote

Nice! The only thing that doesn't look right is the buckle and the strap end; they're both a bit late for that type of suspension, although it is possible they might've coexisted. And I'm probably one of the few that'll care or notice anyway so... Wink

Johan Schubert Moen
View user's profile Send private message
Nat Lamb




Location: Melbourne, Australia
Joined: 15 Jan 2009
Likes: 1 page

Posts: 385

Feedback score: None
PostPosted: Mon 03 Aug, 2009 5:19 am    Post subject:         Reply with quote

"Handsom" was the word that imediately sprung to my mind when I looked at those pics. very nice work.
View user's profile Send private message
Brian K.
Industry Professional



Location: Salt Lake City, Utah
Joined: 01 Jan 2008

Posts: 727

Feedback score: None
PostPosted: Mon 03 Aug, 2009 8:56 am    Post subject:         Reply with quote

JG Elmslie wrote:
so I'd love to see a shot of the throat, so we can look and go "aah, so it is possible", and, if it does'nt inspire the chap to do a commission, perhaps at the least inspire something a little less ghastly than that Frankenscabbard... though even using the same word "scabbard" to describe such an object is an insult to your gorgeous work.... I dont think we got photographs of it, thankfully. it might've cracked the camera lens.

The other question is, can you do scabbards for rebated reenactment blades, with a thicker edge, or does the router/jigging/carving/miracle working you do preclude such thickened edges?


I'll get back to you on the throat pic's, as I don't have any right now.

I guess it depends on how thick the edge is. I've made scabbards for blunt's before, in fact this particular scabbard is a blunt, but of course Windlass blunt edges are fairly thin. My question would be, how chewed up is the edge or would it become after use, because that would definitely affect the fit down the road. I could use a different technique that allowed for plenty of edge damage, if that is the case, but it wouldn't be a 'fit's like a glove' fit. But it would look good, and that would be the point, right?!? Cool

Brian Kunz
www.dbkcustomswords.com
View user's profile Send private message Visit poster's website
Jared Smith




Location: Tennessee
Joined: 10 Feb 2005
Likes: 1 page

Spotlight topics: 3
Posts: 1,532

Feedback score: None
PostPosted: Mon 03 Aug, 2009 1:25 pm    Post subject:         Reply with quote

This seems a little like the Excalibur example on the Albion web site. I don't mean to put down a great value sword, but I am not sure it is worthy of its scabbard!

That is a lovely fit up of the chape to the raised leather outline of its mouth profile by the way. (I am not sure if it is raised there, or if you have stippled the contrasting region to give it the matt finish.) I don't recall seeing it done much before. I think its a great example of creativity based upon historically based design philosophy.

Absence of evidence is not necessarily evidence of absence!
View user's profile Send private message
JG Elmslie
Industry Professional



Location: Scotland
Joined: 18 Jun 2009
Reading list: 28 books

Posts: 272

Feedback score: None
PostPosted: Mon 03 Aug, 2009 1:49 pm    Post subject:         Reply with quote

Brian K. wrote:


I'll get back to you on the throat pic's, as I don't have any right now.

I guess it depends on how thick the edge is. I've made scabbards for blunt's before, in fact this particular scabbard is a blunt, but of course Windlass blunt edges are fairly thin. My question would be, how chewed up is the edge or would it become after use, because that would definitely affect the fit down the road. I could use a different technique that allowed for plenty of edge damage, if that is the case, but it wouldn't be a 'fit's like a glove' fit. But it would look good, and that would be the point, right?!? Cool


thanks for that - I'll look forward to the pics - to discuss commissions for reenactment use, I'll likely discuss that via email or the likes when my cashflow is a bit more secure...been laid off work for a while due to RSI :/
View user's profile Send private message Visit poster's website
Patrick Kelly




Location: Wichita, Kansas
Joined: 17 Aug 2003
Reading list: 42 books

Spotlight topics: 2
Posts: 5,739

Feedback score: 100%
(6 total ▮ 100% positive)
PostPosted: Mon 03 Aug, 2009 2:45 pm    Post subject:         Reply with quote

Well, it's kind of like approving a subprime mortgage so a crackhead can live in a quarter-million dollar home but to each his own. Big Grin

Seriously, you took a mediocre sword and turned it into an eye catching ensemble. Did you re-do the grip as well?

Very nice.
View user's profile Send private message AIM Address
Nathan Robinson
myArmoury Admin


myArmoury Admin

Location: San Francisco
Joined: 07 Jul 2003
Likes: 29 pages
Reading list: 327 books

Spotlight topics: 32
Posts: 11,553

Feedback score: 100%
(12 total ▮ 100% positive)
PostPosted: Mon 03 Aug, 2009 2:55 pm    Post subject:         Reply with quote

You're going to have to take my word for it when I say that the sword is far from mediocre. Of the three I've seen so far, they're all worth at least twice what the asking price was. Far from mediocre.

The scabbard is excellent, Brian.

.:. Visit my Collection Gallery :: View my Reading List :: View my Wish List :: See Pages I Like :: Find me on Facebook .:.
View user's profile Send private message Send e-mail Visit poster's website
Brian K.
Industry Professional



Location: Salt Lake City, Utah
Joined: 01 Jan 2008

Posts: 727

Feedback score: None
PostPosted: Mon 03 Aug, 2009 6:00 pm    Post subject:         Reply with quote

Patrick Kelly wrote:
Well, it's kind of like approving a subprime mortgage so a crackhead can live in a quarter-million dollar home but to each his own. Big Grin

Seriously, you took a mediocre sword and turned it into an eye catching ensemble. Did you re-do the grip as well?

Very nice.


Thank you Patrick. The grip is my handywork as well.

Nathan Robinson wrote:
You're going to have to take my word for it when I say that the sword is far from mediocre. Of the three I've seen so far, they're all worth at least twice what the asking price was. Far from mediocre.

The scabbard is excellent, Brian.


Thank you very much.

Thank's everyone for the kind word's, it really mean's a lot.

Brian Kunz
www.dbkcustomswords.com
View user's profile Send private message Visit poster's website


Display posts from previous:   
Forum Index > Makers and Manufacturers Talk > Custom Handmade Scabbard; Arming Sword
Page 1 of 2 Reply to topic
Go to page 1, 2  Next All times are GMT - 8 Hours

View previous topic :: View next topic
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum






All contents © Copyright 2003-2024 myArmoury.com — All rights reserved
Discussion forums powered by phpBB © The phpBB Group
Switch to the Basic Low-bandwidth Version of the forum