| myArmoury.com is now completely member-supported. Please contribute to our efforts with a donation. Your donations will go towards updating our site, modernizing it, and keeping it viable long-term.
Last 10 Donors: Anonymous, Daniel Sullivan, Chad Arnow, Jonathan Dean, M. Oroszlany, Sam Arwas, Barry C. Hutchins, Dan Kary, Oskar Gessler, Dave Tonge (View All Donors) |
| Author |
Message |
|
Grayson C.
|
 Posted: Fri 10 Oct, 2008 10:54 am Post subject: A question on warbows |
 |
|
I've got a question on warbows, or rather how to purchase one. Where exactly would one go to purchase a warbow with a pull of 100# or more? Many of the sites that I frequent offer bows that are about 60# but say that they can make bows over this length as well.
Does anyone here have any suggestions?
|
|
  |
 |
Randall Moffett
|
| Posted: Fri 10 Oct, 2008 11:27 am Post subject: |
|
|
I have lived outside the States for too long so do not know any good bowyers there but when I get the cash together I hope to get a 110-120 from Steve here.
http://www.diyarchery.co.uk/
Send Steve an email and I am sure he could help you out.
Are you currently drawing a pretty substancial bow? 100 is pretty tough stuff to start on.
RPM
|
|
|
|
|
|
Jan H.
|
|
|
|
|
|
Lin Robinson
|
| Posted: Fri 10 Oct, 2008 4:42 pm Post subject: Re: A question on warbows |
|
|
| Grayson C. wrote: | I've got a question on warbows, or rather how to purchase one. Where exactly would one go to purchase a warbow with a pull of 100# or more? Many of the sites that I frequent offer bows that are about 60# but say that they can make bows over this length as well.
Does anyone here have any suggestions? |
I would not start at 100#, but if you have experience and have been drawing a bow with something close to that weight have at it. Shooting a bow that is too strong for you is no fun.
Lin Robinson
"The best thing in life is to crush your enemies, see them driven before you and hear the lamentation of their women." Conan the Barbarian, 1982
|
|
|
|
|
Jonathan Blair
|
| Posted: Fri 10 Oct, 2008 5:02 pm Post subject: |
|
|
| Randall Moffett wrote: | I have lived outside the States for too long so do not know any good bowyers there but when I get the cash together I hope to get a 110-120 from Steve here.
http://www.diyarchery.co.uk/
Send Steve an email and I am sure he could help you out.
Are you currently drawing a pretty substancial bow? 100 is pretty tough stuff to start on.
RPM |
I second the recommendation on diyarchery.
"Think not that I am come to send peace on earth: I came not to send peace, but a sword." - The Lord Jesus Christ, from The Gospel According to Saint Matthew, chapter x, verse 34, Authorized Version of 1611
|
|
|
|
|
|
Grayson C.
|
| Posted: Fri 10 Oct, 2008 7:59 pm Post subject: |
|
|
|
Actually I pull a 75 lb bow pretty well, but the bow isn't really for me but a friend who is interested and I figured the folks here would know where to go to get a bow of much heavier poundage than normal. That said, I've pulled 100 lbs before and I found it tremendously difficult but not impossible.
|
|
|
|
|
|
Daniel B.
|
| Posted: Fri 10 Oct, 2008 8:49 pm Post subject: |
|
|
Hello Grayson,
I can confidently recommend Bill Darr from Whipperwill Archery. He's in the states and has been making bows for several decades and stands behind his workmanship. I've personally owned 2 warbows/longbows from him so far. The first was Ash 75# @ 32" with a second Ash 70# @ 32". I've had the second since 2005 and have over 1000 arrows loosed on it. My old roommate has a yew 80-90# @ 32" since 2003 and another yew 35# @ 28" since 2005 (don't quote me on the weights it's been a while) which continue to shoot beautifully. I currently have a yew 85-90# @ 32" and Red Elm 40-45# @ 26" waiting to be completed by years end. Other than these, my other friends have purchased from him traditional indian flatbows from Osage with similar success. I all heartedly endorse him as a superb bowyer.
He can make it from yew, ash, elm or other exotics. Let me know if you're interested in his contact information and I'll PM you with it.
Best,
Db
|
|
|
|
|
|
Grayson C.
|
| Posted: Fri 10 Oct, 2008 11:28 pm Post subject: |
|
|
| Daniel Balseiro wrote: | Hello Grayson,
I can confidently recommend Bill Darr from Whipperwill Archery. He's in the states and has been making bows for several decades and stands behind his workmanship. I've personally owned 2 warbows/longbows from him so far. The first was Ash 75# @ 32" with a second Ash 70# @ 32". I've had the second since 2005 and have over 1000 arrows loosed on it. My old roommate has a yew 80-90# @ 32" since 2003 and another yew 35# @ 28" since 2005 (don't quote me on the weights it's been a while) which continue to shoot beautifully. I currently have a yew 85-90# @ 32" and Red Elm 40-45# @ 26" waiting to be completed by years end. Other than these, my other friends have purchased from him traditional indian flatbows from Osage with similar success. I all heartedly endorse him as a superb bowyer.
He can make it from yew, ash, elm or other exotics. Let me know if you're interested in his contact information and I'll PM you with it.
Best,
Db |
Sure, give me the info and I'll be sure to pass it on to my friend!
|
|
|
|
|
Chuck Russell
|
|
  |
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
All contents © Copyright 2003-2024 myArmoury.com — All rights reserved
Discussion forums powered by phpBB © The phpBB Group
Switch to the Basic Low-bandwidth Version of the forum
|
This is a standard topic