Go to page 1, 2  Next

A Dagger by Peter Johnsson.
Everyone has seen this before, but I'm very excited to add it to my collection so you'll have to put up with a few photos. :)

Ten years ago, Peter made this for Nathan Robinson. I always thought it would make a perfect companion for my sword, which Peter made nearly twenty years ago and I still think it does. As with many, if not most medieval daggers, it has a petite and almost fragile look about it. However, once in hand one realizes its robust construction. Original antiques always seem surprisingly fragile when compared to most modern replicas. They're not, but this is due entirely to comparing them to modern substandard recreations. Modern swords have seen much improvement in this regard, but daggers in general still lag behind in capturing the true spirit of the originals. Peters work always captures these nuances perfectly. I've always been impressed with the sense of proportional balance his work exhibits. All of the elements flow together in perfect harmony. I don't always see this in the work of others, even some who are quite skilled and highly regarded.

Thanks to Nathan for giving me the opportunity to acquire a piece that's been on my mind for a decade.

[ Linked Image ]
[ Linked Image ]
[ Linked Image ]
[ Linked Image ]
[ Linked Image ]
[ Linked Image ]
[ Linked Image ]
[ Linked Image ]


Last edited by Patrick Kelly on Sat 12 Dec, 2020 6:46 pm; edited 1 time in total
Beautiful dagger, I understand most cross hilt daggers were just mini swords? Was it also common for scabbards to not have chapes?
I’ve always loved that piece. Congrats!
Edward Lee wrote:
Beautiful dagger, I understand most cross hilt daggers were just mini swords? Was it also common for scabbards to not have chapes?


I wouldn't regard them as "Mini-swords", the geometry involved is quite different. Back in the '80's and early '90's, when knife makers started to try their hand at sword making they made that mistake. They typically took what they knew of knife making and translated it into sword making. What they wound up with was usually a ten pound knife. The overall proportion and geometry is something else entirely its own, despite any similarity in outward appearance.

Considering period sources and what surviving examples that are available for study, I'd say the lack of a chape was not uncommon in the period represented here.
Chad Arnow wrote:
I’ve always loved that piece. Congrats!


Thanks I'm pretty stoked about it and it arrived on the day before my birthday!

The Tod Dagger that was supposed to be my B-day present from my wife is stuck in the PO's ISC in Chicago. The facility widely known as, "The place where packages go to die". It might be here by next Xmas, so at least this one arrived in a timely manner.
Congratulations Patrick. That is a very nice companion piece to your sword, they look great in the picture together. Let me just say that you are a very lucky man to now own two pieces by Peter.
Scott Kowalski wrote:
Congratulations Patrick. That is a very nice companion piece to your sword, they look great in the picture together. Let me just say that you are a very lucky man to now own two pieces by Peter.


Thanks, an embarrassment of riches indeed.
I hated letting this one go but 2020 has been a terrible year and Patrick was there to help me out. The dagger couldn't have gone to a better person. I would have dreaded for this to go to anyone other than him. He is the perfect person to appreciate the exceptional characteristics exhibited in the piece, particularly how it captures the difficult to describe nuances of antiques. It's a remarkable piece as are all of Peter's creations.

I'm really glad you got it, Patrick and I hope you'll enjoy it. Happy birthday!
Nathan Robinson wrote:
I hated letting this one go but 2020 has been a terrible year and Patrick was there to help me out. The dagger couldn't have gone to a better person. I would have dreaded for this to go to anyone other than him. He is the perfect person to appreciate the exceptional characteristics exhibited in the piece, particularly how it captures the difficult to describe nuances of antiques. It's a remarkable piece as are all of Peter's creations.

I'm really glad you got it, Patrick and I hope you'll enjoy it. Happy birthday!


Thank you Nathan, your kind words are truly appreciated. I hope the money helps you out in at least some small way. I have so many friends who are really struggling in the current environment that it made me feel a bit guilty to be able to make a purchase like this. On the other hand, this dagger really struck a chord with me and it's been on my mind all these years. I couldn't pass it up.

55 years old tomorrow and officially a senior, oh my!
That is a very nice looking dagger. The thickness of the point is just flat intimidating.

That is also a very nice looking hat. My first guess would be Stetson Saxon (partially because that is my hat of choice), but knowing how tall you are, I suspect that brim is actually a bit wider than it appears at first.
Greyson Brown wrote:
That is a very nice looking dagger. The thickness of the point is just flat intimidating.

That is also a very nice looking hat. My first guess would be Stetson Saxon (partially because that is my hat of choice), but knowing how tall you are, I suspect that brim is actually a bit wider than it appears at first.


Thanks Greyson, the point is definitely stout.

You're half correct, Stetson Temple. Having had a hat as mandatory wear for my entire professional life, I never was enthused about them on my own time. Then, early last summer I got one heck of a sun burn on my bald head and that was that. Now, regardless of the climate I never go out without one.
Patrick Kelly wrote:
Greyson Brown wrote:
That is a very nice looking dagger. The thickness of the point is just flat intimidating.

That is also a very nice looking hat. My first guess would be Stetson Saxon (partially because that is my hat of choice), but knowing how tall you are, I suspect that brim is actually a bit wider than it appears at first.


Thanks Greyson, the point is definitely stout.

You're half correct, Stetson Temple. Having had a hat as mandatory wear for my entire professional life, I never was enthused about them on my own time. Then, early last summer I got one heck of a sun burn on my bald head and that was that. Now, regardless of the climate I never go out without one.


I agree since I started shaving my head around 2010 I want to use a hat in Summer for the Sun and in Winter for the cold.

A good Indiana Jones fedora for shade and in Winter what we call in Canada a " Tuque " which I guess is called a watch cap in other places.

Patrick, well 55 years old ! Happy birthday, but I just turned 71 a few days ago so I think of 55 as being when I was young .... ;) :lol:

Oh, and nice dagger, glad you got it and that buying it from Nathan was helpful for him considering that it seems that it's been a bad year for him with no income !

Like Nathan wrote, it's a plus that he found a good home for it even if it's a bit sad that he had to part with it.

Best wishes.
Jean
Edward Lee wrote:
Beautiful dagger, I understand most cross hilt daggers were just mini swords? Was it also common for scabbards to not have chapes?


Edward, as Patrick said, it’s a little more complicated than them being mini swords. Quillon daggers seem to get less press than other forms. Like other dagger forms, they range in size and decoration. Some are pretty small (9-12 inches overall), while some are large like the one here or even bigger. During the medieval era, they seem less likely to be made as a set with a sword. In the Renaissance, though, we see a decent amount of daggers made to match a sword. Wheel pommels exist, as do cross-shaped ones, scalloped round shapes, polygonal (like hexagonal) pommels, lozenge shapes and others. Some of the pommel shapes found on quillon daggers are never (or at least are very rarely) found on swords. Some pommel forms found on swords don’t seem to be found on daggers either.

I could probably go on for a while, but won’t. :) I’ve had several different examples of quillon daggers in my collection through the years. I like them quite a bit!
Happy birthday, Patrick. Congratulations on that dagger; it's a truly beautiful piece of art.
I remember that one, and I'm jealous.. In the unlikely event you ever want to part with it, I have more money than good sense. :D Happy birthday!
How does the A&A version of this type of dagger compare with Peter's?
Hey, have a happy birthday! :)
What an awesome reproduction - it is one from Nathan's collection I have always really admired on here; glad to see it go to another appreciative person. Peter's work is fantastic...
Arne G. wrote:
How does the A&A version of this type of dagger compare with Peter's?


No criticism toward A&A, but that's really like comparing a Ford F150 to a Ferrari Testarossa (or whatever analogy car guys like to use). The A&A lacks much of the subtle shaping present in Peters example. However, the A&A is a solid entry at its price point and one I'd recommend. I won't comment on the price of the PJ, except to say, if you're going to climb that high you'd better take some oxygen. :) The A&A offering is made to a price point in order to be a competitive product and I think it succeeds. This dagger is a one off, made by a master smith with an eye towards execution of fine detail and authenticity, without the concerns of affordability and repeatability in a production environment. They both succeed in their intent, but they're really two different things.
Joe Maccarrone wrote:
I remember that one, and I'm jealous.. In the unlikely event you ever want to part with it, I have more money than good sense. :D Happy birthday!


Well, it only took Nathan ten years to let it go. At that rate, just let me know which nursing home to send it to when the time comes, :)
Patrick Kelly wrote:
Joe Maccarrone wrote:
I remember that one, and I'm jealous.. In the unlikely event you ever want to part with it, I have more money than good sense. :D Happy birthday!


Well, it only took Nathan ten years to let it go. At that rate, just let me know which nursing home to send it to when the time comes, :)


Between the blades and the guns I expect to be banned from all nursing homes. :lol:
Go to page 1, 2  Next

Page 1 of 2

Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum




All contents © Copyright 2003-2006 myArmoury.com — All rights reserved
Discussion forums powered by phpBB © The phpBB Group
Switch to the Full-featured Version of the forum