So My question is what are the quality of swords from the Wulfhund website? I was looking at there SKOFNUNG, viking sword.
I don't consider the asking price overly cheap, but I also realize its not an Albion.
I dont know much about viking swords, but Ive taken a look at the SKOFNUNG sword and I can tell you right away, that the edge geometrie of the blade is not very good.
As you can see the blade is pretty flat and it has a huge secondary bevel, which results in very bad cutting chararcteristics.
Therefore I wouldnt advice you to purchase this sword, if you are intending to do lots of cutting with it.
Also the guard-fit and the leather stitching is not done all that well.
I think for the price of 460€ there are better options out there.
As you can see the blade is pretty flat and it has a huge secondary bevel, which results in very bad cutting chararcteristics.
Therefore I wouldnt advice you to purchase this sword, if you are intending to do lots of cutting with it.
Also the guard-fit and the leather stitching is not done all that well.
I think for the price of 460€ there are better options out there.
Markus has summed it up pretty well. It doesn't look like a sword that should be 460€. There is no information on distal taper, which I would absolutely expect at that price, and the handle also looks rather long for the type.
I know that the pictures on their website are a few years old, current iterations might be better, exactly the same, or even worse.
For a slightly higher price, still around 500€, I would recommend commissioning a piece from Vladimir Cervenka, another Czech blacksmith. Here's his website, even if it's really old: http://www.sword.cz
Pretty sure it'll take at least half a year until it's done, though.
Edit: Actually, since you're in the US, you need to consider that shipping and import will be rather pricey if a EU-based maker doesn't deduct VAT from the price for you. You might easily get into the lower end of the price category of Albion, Tinker or Valiant Armory.
You could consider available pieces over at www.kultofathena.com
I know that the pictures on their website are a few years old, current iterations might be better, exactly the same, or even worse.
For a slightly higher price, still around 500€, I would recommend commissioning a piece from Vladimir Cervenka, another Czech blacksmith. Here's his website, even if it's really old: http://www.sword.cz
Pretty sure it'll take at least half a year until it's done, though.
Edit: Actually, since you're in the US, you need to consider that shipping and import will be rather pricey if a EU-based maker doesn't deduct VAT from the price for you. You might easily get into the lower end of the price category of Albion, Tinker or Valiant Armory.
You could consider available pieces over at www.kultofathena.com
There is an Albion squire line clontarf for sale for a similar price right now at SBG. It's the best of their squire line Vikings.
| Johannes Zenker wrote: |
| Markus has summed it up pretty well. It doesn't look like a sword that should be 460€. There is no information on distal taper, which I would absolutely expect at that price, and the handle also looks rather long for the type.
I know that the pictures on their website are a few years old, current iterations might be better, exactly the same, or even worse. For a slightly higher price, still around 500€, I would recommend commissioning a piece from Vladimir Cervenka, another Czech blacksmith. Here's his website, even if it's really old: http://www.sword.cz Pretty sure it'll take at least half a year until it's done, though. Edit: Actually, since you're in the US, you need to consider that shipping and import will be rather pricey if a EU-based maker doesn't deduct VAT from the price for you. You might easily get into the lower end of the price category of Albion, Tinker or Valiant Armory. You could consider available pieces over at www.kultofathena.com |
So it seems like custom is the way to go. What about scabbards.
| J.D. Crawford wrote: |
| There is an Albion squire line clontarf for sale for a similar price right now at SBG. It's the best of their squire line Vikings. |
This is probably the best deal in terms when it comes to a viking sword in terms of value per money, if you're in the states. I wouldn't want to wait for an Albion to be made currently, but if it's available, that's a really good deal.
As for scabbards: for aforementioned Albion you'd have to either make it yourself (not a terribly difficult task, depending on your approach an available tools) or commission it from people and companies like DBK or Christian Fletcher, although you can probably get a simpler one quite a bit cheaper than their usual rates.
Vladimir Cervenka can provide a leather sheath for a moderate price, don't know about wood-cored scabbards.
Can anyone attest to the quality of Vladimir Cervenkas swords? I got a price list from him.
http://myArmoury.com/reviews.html
i would happily buy one,
i would happily buy one,
Page 1 of 1
You cannot post new topics in this forumYou cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
All contents © Copyright 2003-2006 myArmoury.com — All rights reserved
Discussion forums powered by phpBB © The phpBB Group
Switch to the Full-featured Version of the forum
Discussion forums powered by phpBB © The phpBB Group
Switch to the Full-featured Version of the forum