Hey everyone, I've got some pommels ready to go and figured I'd let you guys know before I put them up on my site, since several forum members have expressed their interest. All are made of mild steel with a 1/8" pilot hole. It's pretty easy to widen the hole with a larger drill bit, as the pilot hole will keep it centered. Shipping is $6.80 for any or all (USPS flat rate box).

So without further ado, the pommels:

#1 - A type H/I disk pommel. Diameter is 1.75 inches, weight is 0.48 pounds. $30

#2 - A type H disk pommel. Diameter is 1.75 inches, weight is 0.5 pounds. $30

#3 - Type G/pommel blank. Has very slight bevels, diameter is 1.75 inches, weight is 0.52 pounds. $15

#4 - Type G/pommel blank. Has very slight bevels, diameter is 1.75 inches, weight is 0.52 pounds. $15

#5 - Hexagon pommel blank. Has slightly rounded corners, diameter is 1.5 inches, weight is 0.41 pounds. $15

If you are interested in any of these you can pm me or email to contact@paladinforge.com

Thanks for looking,
Alan

---

 Attachment: 211.48 KB
[ Download ]

 Attachment: 226.83 KB
[ Download ]

Hi everyone, I've dropped the prices on these pommels, $30 each for the type H pommels and $15 each for the blanks.

Thanks,
Alan