Having a bunch of rawhide lamellae (flat rectangular dog chews), making rawhide lamellar looks like an interesting and educational thing to try.
Any hints? There are lots of patterns around, photographic examples, drawings, etc. The more mysterious part is making finshed lamellae. Not being blessed with the dryness of Central Asia, waterproofing appears to be a useful step. Polyurethane floor sealant/coating looks like a reasonable lacquer substitute.
Sakikabara Kozan, "The manufacture of armour and helmets in sixteenth century Japan", notes the gluing together of 2 layers of rawhide (prior to lacquering, of course), with fish glue. This is for solid helmet neck protector laminae, not individual lamellae, but might be good for using the thin pieces. Any suggestions for good glues?
Any hints, suggestions, useful advice, known gotchas, etc.?
| Timo Nieminen wrote: |
| Having a bunch of rawhide lamellae (flat rectangular dog chews), making rawhide lamellar looks like an interesting and educational thing to try.
Any hints? There are lots of patterns around, photographic examples, drawings, etc. The more mysterious part is making finshed lamellae. Not being blessed with the dryness of Central Asia, waterproofing appears to be a useful step. Polyurethane floor sealant/coating looks like a reasonable lacquer substitute. Sakikabara Kozan, "The manufacture of armour and helmets in sixteenth century Japan", notes the gluing together of 2 layers of rawhide (prior to lacquering, of course), with fish glue. This is for solid helmet neck protector laminae, not individual lamellae, but might be good for using the thin pieces. Any suggestions for good glues? Any hints, suggestions, useful advice, known gotchas, etc.? |
http://members.ozemail.com.au/~chrisandpeter/...ellar.html maybe check this article on byzantine lamellar asto the lacing, but as for finishing and waterproofing. no idea
| Timo Nieminen wrote: |
| Having a bunch of rawhide lamellae (flat rectangular dog chews), making rawhide lamellar looks like an interesting and educational thing to try.
Any hints? There are lots of patterns around, photographic examples, drawings, etc. The more mysterious part is making finshed lamellae. Not being blessed with the dryness of Central Asia, waterproofing appears to be a useful step. Polyurethane floor sealant/coating looks like a reasonable lacquer substitute. Sakikabara Kozan, "The manufacture of armour and helmets in sixteenth century Japan", notes the gluing together of 2 layers of rawhide (prior to lacquering, of course), with fish glue. This is for solid helmet neck protector laminae, not individual lamellae, but might be good for using the thin pieces. Any suggestions for good glues? Any hints, suggestions, useful advice, known gotchas, etc.? |
One is very flexible and is made from around 540 individual leather (rawhide) scales that were individually lacquered and then laced together into rows (nerigawa hon kozane).
The other one is made from around 280 individual scales that are very stiffly laced together and apparently wrapped in leather and lacquered into rows.
http://s831.photobucket.com/albums/zz238/estc...?start=all
Nerigawa hon kozane maru dou
http://s831.photobucket.com/albums/zz238/estc...?start=all
Tetsu Hon iyozane maru dou
Page 1 of 1
You cannot post new topics in this forumYou cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
All contents © Copyright 2003-2006 myArmoury.com — All rights reserved
Discussion forums powered by phpBB © The phpBB Group
Switch to the Full-featured Version of the forum
Discussion forums powered by phpBB © The phpBB Group
Switch to the Full-featured Version of the forum