From Czerny's, something special to brighten your weekend:

Lot no. 334 A wooden Milanese round shield from the battle of Giornico 1478

category: ARMOUR
provenence: Milan
dating: last quarter of the 15th Century

description: Of round shape, flat, with a slightly oblique border; made of several set wooden parts, covered with pig skin, on the front surface is a black eagle on a gilded background (or a phoenix arising from its ashes), colored arrows on the border, the back surface has remains of the padding and of the buckles, some missing parts on the covering allow to see the shield's structure. Some parts are missing, there are small defects and partial fadings.

note The battle of Giornico took place between the Milanese troops, sent by Gian Galeazzo Sforza to attack the Leventina Valley which represented a constant threat to the dukedom due to the fact that it supported with Swiss Cantons, and the Levantinese and Confederate troops which, according to the tradition, took Milan's armed men by surprise by rolling boulders over them (that's why the battle is also called The Battle of the Big Boulders); the military action of the dukedome was prepared in a great hurry as an act of retaliation because of the siege of Bellinzona by the Swiss; the cause of the ruinous defeat of the Milanese troops - also supported by the Ticino Canton soldiers - is probably due to that, too. In the ruinous retreat they left behind a large number of victims but also weapons and wagons which represented a handsome booty for the winners.
To be confronted with those illustrated in "Le Rotelle Milanesi Bottino della Battaglia di Giornico 1478 - Stemmi, Imprese, Insegne", di Gastone Cambin, Società Svizzera di Araldica, 1987: those in table XVII and XVIII have, respectively, an eagle that is very similar in its style and iconography, and an identical red and white striped border; the similarity of this shield to the ones pictured can be seen also in the same construction (table XXIX, picture n. 73, page 170, while in page 168 are pictured the shields' backs); the typology of this shield is included in the one of the IV group "A PIENO CAMPO shield" listed on page 167.

condition: very good
dimensions: diameter 62,5 cm.

sold: 12500.00 € (starting price 10000.00 €)

---

 Attachment: 114.32 KB



 Attachment: 109.85 KB



 Attachment: 147.73 KB



 Attachment: 143.81 KB



 Attachment: 145.92 KB

Are there any stats (i.e. weight, diameter, thickness, etc.)?

What a fantastic piece.

Steve

Only the "62.5 cm" figure given in the text, but at least we can break that down into a useful scale to measure other features (maybe break it down to the width between two of those rivets on the "arm" since those are visible in some of the detail shots. Like me, you're probably craving the depth dimension, and that must be speculative, based on later targets. Not clear, either, if there are two layers of boards, as in British targets.

Very Nice !

The Eagle looks very Germanic to me, not Milanese, but that is hardly conclusive. Opinons mean nothing :)

A good counter thought to that, is that if you assumed anything with a fluer de lis on it was French, you would be very wrong!

Love it.

Is that battle damage on the front?

I I have just discovered that I know one thing about this shield for sure and it is that I am going to make a copy of it.

I am in love

Tod

I can see what you are getting at, but that would be quite a dramatic bend to be visible over really a very short distance from the black to the edge and also it would be very hard to get it uniform as the grain direction changes round the rim. So I suspect that it is flat.

As to thickness, I don't know but as a guess I go with you. I made a shield a while back that was about 15mm 5/8" thick and with the leather front face ended up about 18mm 3/4" at about 36" diameter rather than the 25" of this one and it was clearly way too heavy and in fact as a viking age one, it should really have been out of 7-8mm board. I made it thicker because I was sure that the stats must have been wrong on Viking age shields but clearly they were not. This one has half the area of that and so at 15mm plus a facing, it would be half the weight and that would be viable.

Before anyone asks I didn't have weights on the one I made, so all I can say is that 3/4" of wood, at 25" and I would guess cross ply would be both effective at stopping blows without disintegrating too readily and would also be manageable in terms of weight. The wood looks like a pine, but not the speed grown pap we have to suffer these days, so a pine worth having.

What is also interesting is the rather crude wrapping of the front cover over the rear face and glueing in place, they have even slit the leather to make it wrap round easier rather than press it into shape, so a nice piece from the front, but rather crudely executed from the back. The money was definitely put into the side to impress.

Tod

I spoke too hasitily.

Looking at the front of the shield, the cut on the wing on the left side as looking at it, seems to show the edge of the board running vertically - so not cross ply I think.

Tod

Could it be three layers of ply, the middle one running horizontally? I'm not sure that the iron strips are sufficient to hold those slats together otherwise.

Regarding the edge sloping down, the description does say:

Quote:

flat, with a slightly oblique border

To me that suggests that you''re right Sean as I'm not sure how else to interpret that quote.

Thanks for posting this. It's not often one sees such a thing.

Darren.

Some people think that the wood is a modern replacement, the shield was restored recently I believe.

If it was made from say, four vertical strips of wood of equal width, the edge ones wouldn't have a lot of steel overlapping them. I don't know much about period woodwork but I guess that glue, pins, other vertical laminations etc could provide the strength needed.

The piece was discussed at armsandarmourforum.com, some people doubt of its authenticity.

It is part of a batch of numerous surviving rotelle from the battle of Giornico, many are still preserved in Switzerland, but they have a patina this piece doesn't have.

here paint is bright and leather (apparently pork) is clean, so i thought it could be a restored piece.

Restorers in italian museums are accustomed to transfer paintings from a surface to another, this would be possible for high level ones.


Also, the edges of this piece are glued while other originals showed in the td at armsandarmourforum had nailed edges.

i would swear the glue that appears on this edges is vinavil ...

Confronting this with the pics of other surviving pieces should give an idea of what i mean, this shield appears quite a bit different and many people at the other forum had suspects about its authenticity.

The other ones are not restored, though.

I'm sure this is (regardless of a transplant of the painted skin) because of its bright and neat colors, the absence of any patina and efflorescence as it is visible on the others.

So it could be authentic and its colors would be quite close to their original state.

here we have decent but low res details of the other rotelle

http://www.ugopozzati.it/Rotelle-Milanesi.htm

Thanks for those pictures Bruno, I had no idea so many were around in such good condition.

As regards the authenticity of the piece shown I can't say any more than I have.

Specifically to Bruno, as you have either held or come very close to this shield can you tell us if the edge is dished and how thick it is?

Tod