Go to page Previous  1, 2, 3 ... 72, 73, 74, 75  Next

Nicholas T wrote:
latest one on the way for me, Patrick Barta 164 viking sword, thanks to a member of this forum!


Glad you're getting what you wanted, and I'm getting what I wanted! In a way, I payed for this sword (story to come).
Snatched this one up for $150 shipped, dont know what MRL model it is, blade is marked Made in Italy, no shield stamp..

I believe that's a Museum Replicas piece made by Del Tin. It was called the "War Sword" or something very similar. Early 1990s era.
Ryan.

I am intrigued about your sword but the download doesn't seem to show. I have an older Del Tin/MRL sword that was apparently listed as a Danish War Sword, so color me curious. Did it look like this one?

Cheers
GC


 Attachment: 8.62 KB
webreadytin.jpg

[ Linked Image ]

My latest aquisition.
AlbionSwords Royal Armories l.33


 Attachment: 643.1 KB
[ Download ]
And before that I got a twohanded sword by Wulflund:
[ Linked Image ]

How are the quality of Wulfund swords? As in compared to hanwei, windlass or del tin.

Thanks
In'Carius Craft "Principe" lookalike
My first try with Rafal; i must say for 750 Euros (scabbard, custom dye and shipping included) i am pretty much satisfied with his work!

[ Linked Image ]
Albion "Principe"
And of course the original big bad lady - screaming blue murder! Worth every single piece of money, as always.

[ Linked Image ]
Edward Lee wrote:
And before that I got a twohanded sword by Wulflund:
[ Linked Image ]

How are the quality of Wulfund swords? As in compared to hanwei, windlass or del tin.

Thanks


The Wulflund swords are well balanced and the finish is ok. Better balanced than most of the Windlass and the Del Tin stuff I held in hand yet. The finish is somewhere between Windlass and Del Tin.

Some of their swords however are a bit on the heavy side.
my latest 3 this week

1. Castlekeep Fetter Lane #3
2. Longship Armory La Domaine
3. VA Craftsman collection Castillion Falchion


 Attachment: 83.79 KB
[ Download ]

 Attachment: 78.51 KB
[ Download ]

 Attachment: 84.23 KB
[ Download ]

 Attachment: 80.63 KB
[ Download ]

 Attachment: 35.25 KB
[ Download ]

 Attachment: 129.84 KB
[ Download ]

 Attachment: 31.48 KB
[ Download ]

 Attachment: 120.51 KB
[ Download ]
Rudolf Krutsky Mainz type Gladius
Very affordable, nice package from the Czech Republic; a sleek, elegant Mainz Gladius, made by Rudolf Krutsky. Scabbard and sharp sword only 300 Euro!

[ Linked Image ]
Re: Rudolf Krutsky Mainz type Gladius
Holger Mahling wrote:
Very affordable, nice package from the Czech Republic; a sleek, elegant Mainz Gladius, made by Rudolf Krutsky. Scabbard and sharp sword only 300 Euro!

[ Linked Image ]


Looks very nice Holger, especially at that price. I would have expected to be at least twice as much.

I also like both of the XVIIIc's that you have acquired. How does Rafal's version compare to the Albion? from the picture it looks to be a well done piece.
Re: Rudolf Krutsky Mainz type Gladius
Scott Kowalski wrote:
Holger Mahling wrote:
Very affordable, nice package from the Czech Republic; a sleek, elegant Mainz Gladius, made by Rudolf Krutsky. Scabbard and sharp sword only 300 Euro!

[ Linked Image ]


Looks very nice Holger, especially at that price. I would have expected to be at least twice as much.

I also like both of the XVIIIc's that you have acquired. How does Rafal's version compare to the Albion? from the picture it looks to be a well done piece.


Rafals version blade feels - i hate a little to say - much more solid than the Albions blade. Of course the Albion is much better balanced. The blade on Rafals sword has distal taper too, but starts thicker and tapers not so much. But its almost flawless in shape, wonderful work. I would very much like the to test the Albion blade with Rafals grip and vice versa; it think both would feel great then. The grip on Rafals blade is shorter and thinner and gives the alread thicker blade much more forward weight; still feels good, but it has some heft. For some, too much. Grip feels very good with some substantial gloves but without it feels too thin.

The Mainz Gladius is indeed very nice for its price - but surely not perfect. I would say the grip is a little bit too long (i was always under the impression guard and pommel should "encase" the fist?); it leaves you room for another too fingers. The other typical minor issue is the grip being perfectly round... well, you have that EVERYWHERE in the "lower ranks".
Vince Evans Steinvik sword!


 Attachment: 39.67 KB
[ Download ]

 Attachment: 45.89 KB
[ Download ]

 Attachment: 66.61 KB
[ Download ]

 Attachment: 18.28 KB
[ Download ]

 Attachment: 86.24 KB
[ Download ]

 Attachment: 105.63 KB
[ Download ]
Looks great! I love highly detailed work.

Mine is a cheap 1742 infantry sword from Dixie Gun Works. It is the first actual sword I've bought in about a decade. Not bad for the money, but I intend to give it a custom hilt when I have the time. Also made a belt for it.


 Attachment: 327.19 KB
[ Download ]

 Attachment: 297.11 KB
[ Download ]

 Attachment: 411.42 KB
[ Download ]
New sword: Balinderry style viking sword made by Viktor Berbekucz, Hungary.

Blade made of tempered 51CrV4 steel, hardened to 52 -54 HRC (vendor data), sharp. Wooden grip wrapped in brown leather.
Guard and pommel are cast iron.

Blade length: 750 mm
Total length: 900 mm
Blade width: 45 mm at the guard
Weight: 980 grams (sword only)

A little too narrow and too light for my taste, but excellent work for the price of 299 Euro with scabbard included. A shieldmaiden's sword! Good edges, straight, centered fuller, slight secondary bevels, a few grindmarks (easy to polish out). Nice!

[ Linked Image ]
My new (blunt) sword by Pavel Moc:
[ Linked Image ]
With a wooden scabbard:
[ Linked Image ]
[ Linked Image ]
[ Linked Image ]

I love it.
Type XIIa from "In'Carius Craft"/Rafal Woszcyna ofPoland; very nice package for 700 Euro - scabbard and shipping included!

overall length 115 cm

blade length 90 cm

weight 1420 g

POB 13 cm

[ Linked Image ]

[ Linked Image ]

[ Linked Image ]
Holger Mahling wrote:
Type XIIa from "In'Carius Craft"/Rafal Woszcyna ofPoland; very nice package for 700 Euro - scabbard and shipping included!

overall length 115 cm

blade length 90 cm

weight 1420 g

POB 13 cm

[ Linked Image ]

[ Linked Image ]

[ Linked Image ]


That is another great acquisition Holgar. For the price it is amazing looking. How long is the grip, about 20 cm? How is the handling of the sword?
That's nice work for 700 Euro, especially the scabbard.
Go to page Previous  1, 2, 3 ... 72, 73, 74, 75  Next

Page 73 of 75

Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum




All contents © Copyright 2003-2006 myArmoury.com — All rights reserved
Discussion forums powered by phpBB © The phpBB Group
Switch to the Full-featured Version of the forum