780lb windlass bow
Hi All,

This is a 780lb early 15thC war bow.

The bow is of fairly standard form and so the stock is ash, the string is waxed linen, the trigger is sprung and the nut is steel. The bow is clamped in place with bow irons and the fore stock is pinned through.

The bow shoots 15" ash bolts with maple vanes and fitted with Hector Cole bodkins. The shaft is 1/2" and tapered down to fit between the fingers of the nut. The vanes are set into curved grooves cut into the shaft, so that they create a wing section and cause the bolt to rotate.

Unusually for me the windlass is not the 6 wheel type, but has only 2 wheels as per the customer request and this really dates it to the earlier part of the 15thC.

What is evident is that it takes a great deal more work to span this bow because of the reduced ratio of the double wheels compared to the 6. That all said, this bow shoots very nicely indeed.

I hope you like it.

Tod


 Attachment: 192.97 KB
whole bow .jpg


 Attachment: 137.63 KB
bow front.jpg


 Attachment: 163.21 KB
bow laid out .jpg


 Attachment: 217.98 KB
pulley and irons .jpg


 Attachment: 161.09 KB
pulleys close .jpg


 Attachment: 147.21 KB
windlass cranks.jpg


 Attachment: 154.01 KB
bolts.jpg


 Attachment: 212.13 KB
bolts close.jpg

I think I need to see test shots from this thing.

You know, for reasons.
Tyler Jordan wrote:
I think I need to see test shots from this thing.

You know, for reasons.

Seconded

As always, your work is masterful Mr. Todeschini.
Aesthetically pleasing and possessed of authority..... That's the bow Tod, lest you think I was buttering you up.... :D

There are a few people in the modern day who fit the appelation Renaissance Master Craftsman. I can think of no better exemplar than yourself

Martin
Tod as usual very impressive work that looks like your time machine is working very well as you go back in time and buy these and pretend to have made them yourself. ;) :p :lol: ( I'm obviously kidding ).

It would be nice to see some video of this one being used, but maybe you already sent it to it's happy owner ?

The simpler pulley may be physically harder to work, but is it less likely to get it's pulley ropes tangled up ? The time one saves using it at the price of being a lot more tiring to use, maybe ?
Thanks guys, and I do in fact own a time machine that I made a few years back from a beer can and some jelly.

I am unlikely to get to film this one, but I have a similar bow on you tube and you can find it here https://www.youtube.com/watch?v=WEOeZTV9wiA

Jean you are right though harder to span, it makes it faster too, so in fact is a handier weapon in my mind.

I shot it again today - its a nice one.

Tod

Page 1 of 1

Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum




All contents © Copyright 2003-2006 myArmoury.com — All rights reserved
Discussion forums powered by phpBB © The phpBB Group
Switch to the Full-featured Version of the forum