Swords, left to right: Kris Cutlery, Del Tin 215a, Neil Burridge Naue II (late), Manning Imperial Canaanite khopesh, Neil Burridge Egyptian Khopesh, Neil Burridge type G, Del Tin 210a.
Attachment: 97.84 KB
Here are some of mine....
Swords, left to right: Kris Cutlery, Del Tin 215a, Neil Burridge Naue II (late), Manning Imperial Canaanite khopesh, Neil Burridge Egyptian Khopesh, Neil Burridge type G, Del Tin 210a.
Attachment: 97.84 KB
Swords, left to right: Kris Cutlery, Del Tin 215a, Neil Burridge Naue II (late), Manning Imperial Canaanite khopesh, Neil Burridge Egyptian Khopesh, Neil Burridge type G, Del Tin 210a.
Attachment: 97.84 KBNow, two axes: Manning Imperial Canaanite "duckbill", Windlass "Assyrian"
Attachment: 94.82 KB
Attachment: 94.82 KBSome comments: The Kris Cutlery sword (long discontinued) is actually made of brass. Not bronze. At 2.5 lbs it's relatively heavy, but quite manageable. Of course, it's historical accuracy is minimal, at best -- not only the material, but also the length of the hilt and the fullering are questionable.
The Del Tin swords are crowbars. They both weigh over 3.5 lbs. I had Art Elwell install the stag grips on the 215a. It was my first bronze sword; what did I know at the time? The 210a is heavier, but better balanced. Still a crowbar.
The Manning Khopesh is overweight at 2.75 lbs. I think it handles well despite the weight. It's definitely a chopper.
The Neil Burridge swords are, of course, awesome. Comparing the Burridge Naue II and the DT 215a is like night and day. All my other bronze swords bow down to the awesomeness that is the Burridge bronze.
The Manning Imperial "duckbill" is mounted on a pretty obviously modern hammer haft. It's a temporary arrangement until I can come up with something better.
The Del Tin swords are crowbars. They both weigh over 3.5 lbs. I had Art Elwell install the stag grips on the 215a. It was my first bronze sword; what did I know at the time? The 210a is heavier, but better balanced. Still a crowbar.
The Manning Khopesh is overweight at 2.75 lbs. I think it handles well despite the weight. It's definitely a chopper.
The Neil Burridge swords are, of course, awesome. Comparing the Burridge Naue II and the DT 215a is like night and day. All my other bronze swords bow down to the awesomeness that is the Burridge bronze.
The Manning Imperial "duckbill" is mounted on a pretty obviously modern hammer haft. It's a temporary arrangement until I can come up with something better.
| David Wilson wrote: |
| The Manning Imperial "duckbill" is mounted on a pretty obviously modern hammer haft. It's a temporary arrangement until I can come up with something better. |
Do we have art showing how duckbills were mounted?
What I would take to be the obvious method is to use cord/rawhide thongs to strap it on, through the holes (and above/below the head?). This would work better if the haft sticks out into the holes. It looks like it would, if it was wider, but you have some wooden plugs/wedges to make the narrower haft fit. I was wondering if that was deliberate to make the haft less visible in the holes.
That's a beautiful collection David. Thanks for sharing. IMO all sword collectors should have at least one Burridge sword. It gives some perspective and helps to dispel myths about swords.
An excellent array of weaponry, David. After selling my three incomplete Burridge blades some time ago, I am seriously regretting the move... It's been hard to come up with finances to purchase more to actually finish!
Are you a member over at the Bronze Age Center? I can't recall... Re-posting your collection there would be a very fine thing, indeed, as many members would appreciate being able to see these photos and even more details regarding your hilt constructions, etc.
Cheers!
-Gregory
Are you a member over at the Bronze Age Center? I can't recall... Re-posting your collection there would be a very fine thing, indeed, as many members would appreciate being able to see these photos and even more details regarding your hilt constructions, etc.
Cheers!
-Gregory
| Timo Nieminen wrote: | ||
Do we have art showing how duckbills were mounted? What I would take to be the obvious method is to use cord/rawhide thongs to strap it on, through the holes (and above/below the head?). This would work better if the haft sticks out into the holes. It looks like it would, if it was wider, but you have some wooden plugs/wedges to make the narrower haft fit. I was wondering if that was deliberate to make the haft less visible in the holes. |
I'm not sure, anyway I haven't seen any... I was considering the leather cord/wrap technique similar to what you're describing at some point, though....
| Gregory J. Liebau wrote: |
| An excellent array of weaponry, David. After selling my three incomplete Burridge blades some time ago, I am seriously regretting the move... It's been hard to come up with finances to purchase more to actually finish!
Are you a member over at the Bronze Age Center? I can't recall... Re-posting your collection there would be a very fine thing, indeed, as many members would appreciate being able to see these photos and even more details regarding your hilt constructions, etc. Cheers! -Gregory |
I actually am a member over at BAC... was going to post there too but ran out of time....
(My hilt construction technique is simple -- I usually let more talented folks do it for me.....) :D
| Timo Nieminen wrote: |
| Do we have art showing how duckbills were mounted?
What I would take to be the obvious method is to use cord/rawhide thongs to strap it on, through the holes (and above/below the head?). This would work better if the haft sticks out into the holes. It looks like it would, if it was wider, but you have some wooden plugs/wedges to make the narrower haft fit. I was wondering if that was deliberate to make the haft less visible in the holes. |
There are plenty of depictions of duckbill axes in use. No thongs are used, more likely just a wedge at the top like a modern axe. The shaft is fully exposed in the holes, in fact on a few surviving examples the wood is gone but there is a decorated gold sleeve still in place. The haft is typically angled or curved forward a little, and can flair at the butt. I *love* duckbills and am jealous of yours!
WINDLASS made that axe??? I'm shocked! I'm guessing it's a bit of a boat anchor, but still, it casts the right shadow, as far as I can tell. (Though I confess that's not a style I've studied!)
Nice collection, thanks for sharing the photos!
Matthew
| Matthew Amt wrote: |
|
There are plenty of depictions of duckbill axes in use. No thongs are used, more likely just a wedge at the top like a modern axe. The shaft is fully exposed in the holes, in fact on a few surviving examples the wood is gone but there is a decorated gold sleeve still in place. The haft is typically angled or curved forward a little, and can flair at the butt. I *love* duckbills and am jealous of yours! WINDLASS made that axe??? I'm shocked! I'm guessing it's a bit of a boat anchor, but still, it casts the right shadow, as far as I can tell. (Though I confess that's not a style I've studied!) Nice collection, thanks for sharing the photos! Matthew |
Thanks!
Actually, the axe head itself isn't bad at all! The haft is weird, though. It's rather wide, and just feels odd in the hand.
Nice collection David!
It reminds me that I need a khopesh. Or to finish one of my many unfinished bronze swords... :confused:
It reminds me that I need a khopesh. Or to finish one of my many unfinished bronze swords... :confused:
Very nice collection. Somewhat before my era for collecting, but I agree that everyone should have a sword by Neil, who is a real gentleman to deal with.
Here is mine.
Robert
Attachment: 100.69 KB
Here is mine.
Robert
Attachment: 100.69 KBNice scabbard! Who made it?
Hi,
Sonny Suttles made it. He has made some great scabbards for me. Of late he has been impossible to contact and must be very behind. I have some work in limbo with him. I hope he is very busy and isn't ill.
Robert
Sonny Suttles made it. He has made some great scabbards for me. Of late he has been impossible to contact and must be very behind. I have some work in limbo with him. I hope he is very busy and isn't ill.
Robert
| Matthew Amt wrote: | ||
There are plenty of depictions of duckbill axes in use. No thongs are used, more likely just a wedge at the top like a modern axe. The shaft is fully exposed in the holes, in fact on a few surviving examples the wood is gone but there is a decorated gold sleeve still in place. The haft is typically angled or curved forward a little, and can flair at the butt. I *love* duckbills and am jealous of yours! WINDLASS made that axe??? I'm shocked! I'm guessing it's a bit of a boat anchor, but still, it casts the right shadow, as far as I can tell. (Though I confess that's not a style I've studied!) Nice collection, thanks for sharing the photos! Matthew |
I have a reference book with that type of axe identified as from Luristan in origin but I guess Assyrian is regionally close by or overlaps with the Assyrian Empire at some time period ?
In any case it looks very very close to the pics in my reference books.
Oh, and nice collection David. :D :cool:
I have another version of Bronze sword by Del-tin ( Leaf shaped blade ) purchased from Albion around 2001 and it is overweight also, the tip/central rib was sort of crude and stubby but I used files to at least re-profile it to better geometry and sort of sharpen the edges. I assume that the edges of the Del Tins are not hammer work hardened and too soft to take a good edge: So I didn't try to do much more than create a decent secondary bevel.
| Jean Thibodeau wrote: |
| I have a reference book with that type of axe identified as from Luristan in origin but I guess Assyrian is regionally close by or overlaps with the Assyrian Empire at some time period ?. |
These days "Luristan" has become shorthand for "illegally looted from somewhere in the Middle East".
Last edited by Dan Howard on Wed 03 Oct, 2012 1:10 am; edited 1 time in total
lovely.
http://www.bronze-age-swords.com/index.htm
The menu at the side will roll out when you mouse over it.
http://www.bronze-age-swords.com/index.htm
The menu at the side will roll out when you mouse over it.
| Dan Howard wrote: | ||
These days "Luristan" has become shorthand for "illegally looted from somewhere in the Middle East". |
Interesting and " unfortunate ": Don't know if it qualifies as " these days " since it's in a book I bought around 1969 published in France.
Back then it might actually have been found in Luristan.
Page 1 of 1
You cannot post new topics in this forumYou cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
All contents © Copyright 2003-2006 myArmoury.com — All rights reserved
Discussion forums powered by phpBB © The phpBB Group
Switch to the Full-featured Version of the forum
Discussion forums powered by phpBB © The phpBB Group
Switch to the Full-featured Version of the forum