Since we're doing threads on many other weapon and armour forms, how about one for saxes? Let's see those saxes (no reed instruments, please)!

Here's mine, a broken back sax by Tod's Stuff
[ Linked Image ]

My broken back seax by Michael Pikula. The seax is 19.25 inches overall with a 14" blade and a POB 10.25” from the tip.

---

 Attachment: 92.63 KB

Broken back seax by Michael Pikula

My camera is broken or I would flood this post with pics! I'm posting a few saved shots that the maker's of these seaxes sent me. I'll take some pics of my other seaxes and some groups shots when I get a new camera.

The pattern welded seax has bronze inlay and was made by Michael Pikula.
Blade length: 22.5 inches
Overall: 30 inches

The black handled one is by Eric McHugh. It has an ebony wood grip with antique iron fittings.
Blade length: 24.5 inches
Overall: 32.5 inches

The carved grip one is by Jake Powning.
Blade length: 21.5 inches
Overall: 28 inches

---

 Attachment: 86.05 KB



 Attachment: 54.49 KB



 Attachment: 62.44 KB
[ Download ]

Here is a Seax made by Petr Melc. A beautiful rough forged piece.

Blade length: 8.25 inches
Overall: 13.25 inches

Leather sheath made by me.

Here is my seax.
I made the seax myself (first time at attempting to make a seax my self) and the scabbard is made by Grzegorz Pilarcik of http://www.pilarart.pl/

this blade was a failed attempt, but lessons learned, and I finished it anyway; (I snapped the steel edge after heat treat.) Still needs a sheath.

http://forums.dfoggknives.com/index.php?showtopic=16206

---

 Attachment: 50.16 KB

Here's a couple pics....
First off, left to right: Lutel, Hanwei, Paul Binns. Top down: Lutel, MRL Runic Long Sax (made by MRL)

Second, a better shot of the Lutel "short" saex and the Paul Binns broken back.

---

 Attachment: 90.39 KB



 Attachment: 94.91 KB

Here is my broken-back seax from Tod and Owen Bush. This is the same inlaid seax currently reviewed on the main page- only I had the handle lengthened a bit.

---

 Attachment: 205.12 KB
[ Download ]

Here is a beautiful little seax made by Michael Pikula. Just recently purchased from his post in the Makers/manufacturers forum. An amazing little knife.

Blade length: 4.2 inches

Overall length: 8.4 inches

Leather sheath by me

Andrew-

That looks great! Let me compliment you on your scabbard-making ability.

Blade was made by Hector Cole (i believe based on the Northampton seax), handle (antler) by Andrew Nicholson (Dumfries & Galloway county archaeologist and all round good guy).

[ Linked Image ]

It's been in this state for a few years (I picked up the blade for a song and traded some silverwork with Andy for the handle carving) and does need a good polish.

I keep meaning to fabricate an end-cap in silver (to hide where the tang passes through the handle and had to be peened over) and obviously make a scabbard for it but it's honestly become one of those projects that i keep aspiring to get good enough to attempt.

One thing i have been toying with is some form of inline paint to pick out the carving (possibly a red or black), but i need ot do some honest graft first.

(apologies for the poor photo, it doesn't do it justice)

---

 Attachment: 26.39 KB

Here is mine.
Patternwelded with oak, brass and leather in the grip.
I have not made the sheath yet, but will make one to match the little knife in the picture
Both knives made by me. Grip and sheath by me and my brother.

[ Linked Image ]

[ Linked Image ]

/Viktor

I didn´t want this thread to be forgotten, so I add another sax of mine.
I have not made this one myself.
Bought it some years ago. But had it re-gripped and re-sheated by an artist named Edvin in Sweden.
An Anglosaxon styled broken back sax.

[ Linked Image ]

[ Linked Image ]

/Viktor

Hi all, this is my frist post in this great forum, my name is Ismael and I'm from México, I ask an apology for my bad english. I like the blacksmithing and medieval weapons, mostly i love the forge.
This is my langsax, made by me in 1070 forged steel, tempered, handle of copper, cow horn and bone, wood, and iron "pommel", riveted full tang.
Leather scabbard with bronze ornaments.

[ Linked Image ]

[ Linked Image ]

[ Linked Image ]

Thanks for looking, Greetings!

Hello,
Nice pieces everyone! Here is a pattern welded blade I have from Paul Binns, that I still need to hilt and make a scabbard for. The piece was made from bog iron found in a demolished 16th century barn, and the steel was smelted by a friend of Mr. Binns. It was forged and then ground on a large hand cranked stone wheel. The blade is approximately 15-20cm or so...
Cheers,
Hadrian

---

 Attachment: 241.33 KB
[ Download ]

Hi Ismael, How long is your blade?

Hadrian, that is a really nice blade you got there. You should complete it and post some pictures here :)


/Viktor

Hello again!

Sorry, I forgot to put the measures.

Has 52cm of blade, and 67cm in total.

3cm wide and 4mm thick, the edge is 1 mm and rounded tip.

Thanks for watch!

Tim, I love all of the seaxes that you posted; they're excellent! In particular, the one by Eric McHugh is exceptional!

These are some of the seax knifes my wife and I have made at home...all are hand forged from high carbon steel

---

 Attachment: 34.97 KB