The blade looks like it might have been made from a file.
Does anyone have any familiarity with this knife?
Thanks for any information that you can give me.
Attachment: 24.17 KB
I don't remember where I found this photograph. I think that this is a British WWI trench knife, but I'm not sure. I guess it could be a Confederate D-guard, but the hilt style seems wrong for that type.
The blade looks like it might have been made from a file.
Does anyone have any familiarity with this knife?
Thanks for any information that you can give me.
Attachment: 24.17 KB
The blade looks like it might have been made from a file.
Does anyone have any familiarity with this knife?
Thanks for any information that you can give me.
Attachment: 24.17 KBSoldier made WWI trench knife does seem credible to me and a Civil War D guard bowie or dagger seems less likely to me as it just doesn't have that Victorian mid 19th century look to me: And factory knife of that period would have been more fancy I think and most where English Sheffield made I think: Even cheesy cheap ones would tend more to the ornate/gaudy rather than crude. ( Just a hunch/gut feeling I could be wrong as it's not a period I have studied attentively ).
| Jean Thibodeau wrote: |
| Soldier made WWI trench knife does seem credible to me and a Civil War D guard bowie or dagger seems less likely to me as it just doesn't have that Victorian mid 19th century look to me: And factory knife of that period would have been more fancy I think and most where English Sheffield made I think: Even cheesy cheap ones would tend more to the ornate/gaudy rather than crude. ( Just a hunch/gut feeling I could be wrong as it's not a period I have studied attentively ). |
I agree. The blade is not from the Civil War era. The knife has no features that give away the location or era but I suspect that it is WWI or even WWII and made by a soldier with time on his hands. The blade may have originally been on a different knife, possibly a model 1918 trench knife that somehow became separated from its knuckle guard.
| Lin Robinson wrote: |
|
I suspect that it is WWI or even WWII and made by a soldier with time on his hands. The blade may have originally been on a different knife, possibly a model 1918 trench knife that somehow became separated from its knuckle guard. |
I was over at the historical knife maker, Dan Brock's website - http://plowshareforgeknives.blogspot.com/2009/07/blog-post.html - Among other types, he makes a number of trench knives. He writes:
Unbelievable as it seems now, at least to me, the British army went through the entirety of the first world war with no standard-issue, fighting knife. This fact, coupled with the realities of trench warfare, left the lads needing something to fill the gap, a situation exploited by many manufacturers.
I think this piece may have been one of a private manufacturer's run of knives. It has a production look about it that makes it unlikely to me that it was a soldier's spare time project.
There are a lot of very interesting knives on Dan Brock's website. - bowies, other 19th century replicass, WWI, WWII -
Dan Brock says it is a one-off WWII theater made knife (probably Pacific), with a copper tubing knucklebow. Theater made, of course means that it might have been created in a machine shop on board a ship anchored off Tarawa, or maybe one in Tobruk. Whover made it needed to be near a refrigeration unit to get the copper. Below is an example of such a knife.
Attachment: 62.82 KB
From "Theater Made Military Knives of World War Two" by Bill Wright
Attachment: 62.82 KBFrom "Theater Made Military Knives of World War Two" by Bill Wright
Last edited by Roger Hooper on Sun 24 Jan, 2010 12:58 pm; edited 2 times in total
I asked Dan Brock to recreate the dagger in the first picture, and I just received it. He figured that copper tubing for the knucklebow wasn't going to be strong enough where it was flattened at the grip. He decided to use 3/8 inch diameter solid steel instead. He also made the knucklebow a littler larger. It is very solid and won't buckle. The rivets are poured lead, The grip wood slabs are bubinga
The blade is 6.5 inches long, 1.25 wide. The hilt is 3.75 long. I wish he'd made the hilt 1/4 to 1/2 inch longer - for my hand it works with a hammer grip - handshake grip is not as comfortable.
Still, a very cool little knife
Attachment: 90.9 KB
Dan Brock, Plowshare Forge
Attachment: 96.3 KB
Dan Brock, Plowshare Forge
The blade is 6.5 inches long, 1.25 wide. The hilt is 3.75 long. I wish he'd made the hilt 1/4 to 1/2 inch longer - for my hand it works with a hammer grip - handshake grip is not as comfortable.
Still, a very cool little knife
Attachment: 90.9 KBDan Brock, Plowshare Forge
Attachment: 96.3 KBDan Brock, Plowshare Forge
Page 1 of 1
You cannot post new topics in this forumYou cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
All contents © Copyright 2003-2006 myArmoury.com — All rights reserved
Discussion forums powered by phpBB © The phpBB Group
Switch to the Full-featured Version of the forum
Discussion forums powered by phpBB © The phpBB Group
Switch to the Full-featured Version of the forum