Hi there!

I know, in the past centuries, people were able to craft blackened armor, just wondering,on this picture, is this colour for amours authentic? If yes, how could they made it? And what other colours were pervading (for example in the 15th century)? Thanks for every answer you post :)

---

 Attachment: 26.75 KB

My guess would bet burning the plates with a mixture of tar and pigments. An aquaintance of mine did that with great success. He's an armourer by profession so I guess he knows what he's talking about. There are several different ways of blackening metal, all depending on the use of the item. But for armour I'd go with something that you burn dry to the surface.

Thanks,

Well, I know, how to blacken armor with oil, my problem is with other colours :) If I warm up the armor naturally, I can make a blue-purple like colour, and some other ,depending on the temperature. But the green is not the natural colour of the steel, so that's why I am a bit confused. And for example, blackening, my favourite is the "shiny"-black(attached picture). Dont know, how can it be made (blackening with oil gives a dark surface), if somebody knows the way to do it, please share it with me, because, I would like to make my own armor into that colour.

---

 Attachment: 70.72 KB

I believe that armour is actually black, but the photograph makes it seem green.

Here's a beautiful parade armour that belonged to Prince Mikolas Radziwill of Lithuania:

[ Linked Image ]

I have seen very few armours that are so colorful; it seems to be enameled. There is a matching chaffron too which survives.

[ Linked Image ]

Some of the designs in the Greenwich album show red-tinted armours like this garniture for Robert Dudley, Earl of Leicester:

[ Linked Image ]

And this portrait of Francis, Duke of Brittany, son of Francis I, shows an armour with large sections of russeted steel:

[ Linked Image ]

To get the nice shiny black, first do a high polish then heat it like you would for blue but just take it up to black.

The armour in the original post is black. The greenish tint is due to lighting, printing or digital processing. The only olive green armour is on the modern battlefield. :D

There is a way to do green etc but don't know if it was done then, if copper or copper bearing alloys dissolve into a acid even slightly acid solution and you place a steel object in it the copper forms on the iron which can be very annoying. This is not modern plating but something that I think has always been known about, in some areas there are streams where copper will naturally 'plate' itself onto things.
And of course there are paints and textiles and so on that have been used on armour.

The Radzwill armour is enameled.

Here's a quick Photoshop colour balance adjustment that I think might be a bit closer to reality.

---

 Attachment: 77.23 KB

I don't know about historical ways to do it but if it's just the colour that's desired maybe some of the modern browning, blueing and blackaning chemicals for guns work? Should be easily available from and place in the US that sells custom weapons or similar.

I've done some small projects using a gun bluing solution. It worked pretty well. If you want the shinny black finish then you must buff the steel to a near mirror polish before bluing. The gun bluing chemical solutions can also be difficult to get an even finish with. Because you have to apply it by hand it can come out kind of uneven. I'm sure this could be improved with practice though. I think its' easier than actual heat bluing.

Hi!

Thanks for the posts!

If I know well, gun-bluing chemicals are requires some kind of license to get it, so it can be a bit difficult, but I will try different mods, which ones I will prefer, thanks :)

I'm not sure about availability in Europe, but for metal plating/finishing products in the US, these guys have about anything you will need.

http://www.caswellplating.com/index.html

I used a product called Perma Blue. I bought it at the local gun store but here's a link to it on line. I could be wrong but it would seem strange to need a license for this stuff. All it does is accelerate oxidation in a controlled manner. Here's a picture of what it can look like- http://s675.photobucket.com/albums/vv112/Nath..._30209.jpg

Hi there!

I am looking for examples of late 15th century german armour. Did they used blackening technic on these too? Thanks for any information you can get for me.

Thank you Sean,

have any of these subsisted still in museums? My dilemma is, that a blacksmith making me such an armour, and he don't think it would be authentic (because apart from the sallets, he havent seen any original blackened armour of this type and age).

Hmm, good to know. I will still try to search on it though :) Thanks