Arms & Armor #100 Highland Claymore Arrived Yesterday
I am thrilled beyond expectations and words with this sword! For such a huge beast of a sword it sure handles easily and it's all I can do to put it down. :lol: I have had two main focuses this year for swords, although I did buy a couple more, 2 from Arms & Armor and the Paul Chen Godfred Viking Sword.
Now to see to my other priority when it is ready, the Albion Swords "Vassal" (Falchion), this will be the "Beauty" addition, the Claymore was the "Beast" addition. :lol: "Beauty and the Beast" year.

It's amazing to me that a 56 inch 5 lb 6 oz sword can be wielded with such little effort, at the same time I can feel the awesome power in this sword!

Oh Happy Day!

Bob

Ah, now to the "Vassal "! :D
Congratulations! The Highland Claymore is a heck of a lot of sword, one which I admire greatly but lack the muscle to really use to its best advantage. The Falchion, now, that might be more personally intriguing. It sounds like you're having a banner year.
Sounds like Robert Burns is feeling some of his Scottish roots, eh? Congratulations on your claymore, Bob!
Thank you so much Felix and Steve :!: :) Felix, this sword although it is a beast, it's surprisingly light for the size. I have moderate (which is pretty bad) arthritis all thru my spinal column, including 2 minor hernias in cervical (neck) and 2 minor hernias in the lumbar (lower back), bone spurs here and there, a partial tear in the supraspinatus of both shoulders, arthritis in both shoulders and I do not have a problem wielding this sword. How did I wind up in such bad shape? Well, like an idiot, I tried to be a 25 year old athlete for way too many years. One thing though, I do not pity myself nor am I angry about it. I was the cause of these problems, no one else, and it was not genetic nor systemic, so I only have myself to blame. Anyway, to arrest myself from going off on a tangent here, I have the proper medications, etc. so that I am back to living a life wherein the pain is under control and I feel a whole lot better! One last thing on this, my orthopedic surgeon upon being inquired of, told me that swordplay would be very good for my back, neck and shoulders. I really appreciate your kind and thoughtful reply Felix, thank you!

Yeah Steve I do have a bit of Scotch in me, my dad was Irish and Scottish and there is Scottish blood on my mother's ancestry as well. I spent 7 compulsive years on my maternal ancestry and found 3 lines to Edward I King of England. That and a dollar oughta get me a cup of coffee. :lol:

Even if I were not Scottish I would have wanted a claymore though, as I consider the Scotch to be a very proud and courageous people and I have always had a deep admiration for William Wallace, even before the movie was made.
I also like to represent a lot of cultures in my collection.

Also, the claymore is one of the best known swords by people who are not into swords and it's one that has always attracted me. I've handled several claymores, but none by a company near the caliber of Arms & Armor.

Suffice to say, it's all I can do to put this claymore down in order to go to the bathroom this weekend! :lol:

I love, love, love this sword!

Thanks guys a whole bunch, really, your warm replies really felt good my fellow Knights!

Most Sincerely your friend and comrade!

Bob
Congratulations Bob on the Claymore, as you know I have the slightly bigger 15th century 2 hander ( Couldn't resist. :p )

And I feel the same way about handling: Almost useable with one hand, a " hand and 3/4 " sword maybe. :lol:

Good that the sword handling is actually " good " for you and not only safe for you to do. :cool: Probably helps with range of motion and flexibility and if you don't try to cut large oak trees in half, should be low " impact " exercise.

Impressive swords though !

Been weight training on & off, mostly ON, since 1984 ( Terminator movie got me started. :lol: ) and apart from the occasional
locking up of my back and a " slowmotion " sprain of my left ankle when I put too much weight on the leg press machine I have been lucky with not getting any injuries or wearing down my joints: But then I always undertrain ! Do less, but keep doing it for ever as opposed to being too enthusiastic and quitting after a few weeks until the next year's new year's resolution.
Hi Jean, yeah but your sword tapers more towards the distal. :lol: Actually Jean, I drove myself bananas for months over whether to get the 15th Century Two Hander or the Claymore. Then I drove myself nuts once I decided upon the claymore as to whether I wanted some minor customization to get it to the length of 62 inches. Why? Because I am Nuts! :lol:
Part of what led me to the Arms & Armor Claymore over the 15th Century was that most of my swords are some kind of combination of "cut and thrust" and the 3 Ring Italian Rapier which of course is designed for the thrust, however I did not have one dedicated "cutting" sword and I love cutting swords. I finally decided not to ask for the claymore to be customized because as my wife said: "Bob the sword is 56 inches long, how _ _ _ _ _ _ _ long do you need it to be?!" After absorbing this statement I knew I was being completely nuts again and decided "Why mess with a sword that Arms & Armor long ago perfected?"

Jean, thank you for your most kind words in regard to my back, that was very thoughtful of you! Back in my obsessive work out days at one point I lifted free weights maniacly for 7 years and I am sure I did a lot of damage then. Something that keeps me far from self pity is to give deep thought to all the people who have far more serious medical problems and they did nothing to cause them. Diseases like cancer, rheumatoid arthritis, genetic diseases, our courageous military personnel who lost their lives or are from back at the time of WWII, Korea, Vietnam, to the present and are living without limbs, sight, horribly burned. The military personnel right this very minute in harms way and in great personal danger because they were selfless enough to volunteer into the military and protect our citizens.

I think of these people and you know what? I am damn lucky!

By the way, I really love that 15th Century Two Hander, I have handled it numerous times at the Bristol Renaissance Fair here on the IL / WI border and it is every bit as gorgeous as the Claymore!

Jean, have you ever taken a look at that Arms & Armor Zweihander on the "Custom" page? Wowser!

Well I am loving my Claymore and am spending a lot of time thinking about how gorgeous that Albion Swords "Vassal" (Falchion) is going to be, also I cannot get the Albion Berserkr out of my mind either! I've handled that one several times and all I can say is "SWEET! Oh So Very SWEET"!

Thank you very much once again Jean, my fellow Knight and buddy!

Bob
Bob Burns wrote:
Jean, have you ever taken a look at that Arms & Armor Zweihander on the "Custom" page? Wowser!

Well I am loving my Claymore and am spending a lot of time thinking about how gorgeous that Albion Swords "Vassal" (Falchion) is going to be, also I cannot get the Albion Berserkr out of my mind either! I've handled that one several times and all I can say is "SWEET! Oh So Very SWEET"!

Thank you very much once again Jean, my fellow Knight and buddy!

Bob


You're welcome. :D And yes I've seen the Zweihander on the customs page. ( Do you actually think I wouldn't have seen everything on the A & A site. ;) ;) ;) ) Very nice and probably somewhat expensive ! I do have the DeTin Zweihander that Albion used to sell before they started to make their own swords: It's equally big but not as ornate in the guard and the small shallow fullers tend to wander a bit. Not a bad sword at the time I bought it, decent steel but not really a sharp and almost certainly does not duplicate accurately the handling of the real thing ! Midway between a wallhanger and an accurate copy. ( At least not as closely as the A & A, Angus Trim and Albion swords that are more carefully designed to reproduce the handling of the period pieces. )

Oh, and I have to bug Craig a bit about my customs orders: I think they have been very busy lately and replies to E-Mails a bit slow. I think my Langue de Boeuf was a lot more work than Craig estimated originally and I'm getting a very good price on it. :D So I know how you must also be waiting for that falchion to get into production ! With custom orders delivery times are often twice what was originally expected, and even more if it's something very different than anything the maker has made before. These things would only worry me if the order was with a completely unknown new maker, still one does get to the point of wanting to have it in hand. ;) :lol:

( Edited; Craig got back to me today and everything is fine and on track. :cool: :cool: :cool: )


Last edited by Jean Thibodeau on Mon 19 Jun, 2006 6:44 pm; edited 1 time in total
Jean Thibodeau wrote:
Oh, and I have to bug Craig a bit about my customs orders:


How many customs do you have in the pipeline other then the polearm?
Joe Fults wrote:
Jean Thibodeau wrote:
Oh, and I have to bug Craig a bit about my customs orders:


How many customs do you have in the pipeline other then the polearm?


Well, custom orders with A & A include the pollarm and the Rondel Dagger based on their standard model, but modified: I have a topic thread on that you probably saw.

The Rondel project is almost a done deal but Craig still has to give me a quote on it for me to consider it a " deal ".

The pollarm is a bit late but like I said I'm certainly getting more than my money's worth when I do get it: All the small delays were very acceptable taken one by one but them one realizes that it's late by about 6 months, these little delays do add up. ;)

I see the delay as still reasonable but I am starting to look forward to having it.

Oh, finally, I added the Iberian Mace to the order and I am considering adding the June monthly special Axe also.

Need confirmation on the last. I figure the shipping charges are going to be scary with an 8 foot pollarm, so might as well consolidate those other orders into one shipment. ;)

My other custom order is with Christian Fletcher for an AT1435 with customized hilt and scabbard.

Sort of holding myself back from buying more stuff right now but I see the Ballock dagger by John Gage & a custom crossbow from David Ruff as possible purchases :eek: The question is when I should take the plunge: I should wait a few months before I commit if I use my brain. :blush: But what are the odds of that happening. :lol:
Just go ahead and plunge.

Since your buying will remove temptations for the rest of us, just consider it a public service.


Last edited by Joe Fults on Mon 19 Jun, 2006 10:31 am; edited 1 time in total
Congrats on your new claymore Bob! By the way, have you ever read .....

http://swordforum.com/fall99/aa-100-claymore.html

-Ted ;)
Edward Hitchens wrote:
Congrats on your new claymore Bob! By the way, have you ever read .....

http://swordforum.com/fall99/aa-100-claymore.html

-Ted ;)


One thing worth noting is that the SFI article, like all their content, is quite old. That page dates from 1999 and the A&A Claymore has been redesigned since then. The nostalgia factor is high though! ;)
Thanks Ed and Nathan, yes I read this a couple weeks ago, MAC sent it to me, I guess the sword used to be 2 inches longer since the article says 58 inches? Thank you too Joe! I really put a whole lot of thought into this sword.
Of the "Big Boy Swords" there is a swordsmith here who made a custom Damascus steel zweihander that is gorgeous beyond mere words, he also did a basket hilt broadsword. Someday, someway, I would love to be able to commission him to make me a damascus zweihander like the one he made, but it's an awful lot of money for me, though it's worth every dime, just a whole lot of money for me.

Thanks everyone for the warm messages, especially, it was tough to come up with the money but I made it happen. So your congrats to me means a real lot to me!

Much Thanks!

Bob

Page 1 of 1

Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum




All contents © Copyright 2003-2006 myArmoury.com — All rights reserved
Discussion forums powered by phpBB © The phpBB Group
Switch to the Full-featured Version of the forum