I still have a few of these spear lance/butt lance I bought from Kult of Athena and will use both butt spike and cut off sockets to use on other stick, as long as they last.
I think I will mount at least one as a full lance/spear as this seems to be a discontinued item that Hanwei is no longer making, so I should at least put one of these together on a tapering " BO " white Oak shaft.
![](images/icon_clip.gif)
![Stick14 14.JPG](files/stick14_14_205.jpg)
Butt spike with rubber crutch 1/2" diameter crutch tip.
![](images/icon_clip.gif)
![Stick14 15.JPG](files/stick14_15_101.jpg)
I less a little of the shoulder of the spear to make it wider to better hold on to a rubber crutch tip
![](images/icon_clip.gif)
![Stick14 16.JPG](files/stick14_16_862.jpg)
All the bits and pieces.
![](images/icon_clip.gif)
![Stick14 17.JPG](files/stick14_17_149.jpg)
Close up of the end of the butt spike and the lance part that was cut off next to an intact piece.
![](images/icon_clip.gif)
![Stick14 18.JPG](files/stick14_18_260.jpg)
A better view of the cross section at the end.
![](images/icon_clip.gif)
![Stick14 20.JPG](files/stick14_20_742.jpg)
All the bits and pieces from a different angle.